Export limit exceeded: 421837 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (6068 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50178 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: 8852a: rfk: fix div 0 exception The DPK is a kind of RF calibration whose algorithm is to fine tune parameters and calibrate, and check the result. If the result isn't good enough, it could adjust parameters and try again. This issue is to read and show the result, but it could be a negative calibration result that causes divisor 0 and core dump. So, fix it by phy_div() that does division only if divisor isn't zero; otherwise, zero is adopted. divide error: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 728 Comm: wpa_supplicant Not tainted 5.10.114-16019-g462a1661811a #1 <HASH:d024 28> RIP: 0010:rtw8852a_dpk+0x14ae/0x288f [rtw89_core] RSP: 0018:ffffa9bb412a7520 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 00000000000180fc RDI: ffffa141d01023c0 RBP: ffffa9bb412a76a0 R08: 0000000000001319 R09: 00000000ffffff92 R10: ffffffffc0292de3 R11: ffffffffc00d2f51 R12: 0000000000000000 R13: ffffa141d01023c0 R14: ffffffffc0290250 R15: ffffa141d0102638 FS: 00007fa99f5c2740(0000) GS:ffffa142e5e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000013e8e010 CR3: 0000000110d2c000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: rtw89_core_sta_add+0x95/0x9c [rtw89_core <HASH:d239 29>] rtw89_ops_sta_state+0x5d/0x108 [rtw89_core <HASH:d239 29>] drv_sta_state+0x115/0x66f [mac80211 <HASH:81fe 30>] sta_info_insert_rcu+0x45c/0x713 [mac80211 <HASH:81fe 30>] sta_info_insert+0xf/0x1b [mac80211 <HASH:81fe 30>] ieee80211_prep_connection+0x9d6/0xb0c [mac80211 <HASH:81fe 30>] ieee80211_mgd_auth+0x2aa/0x352 [mac80211 <HASH:81fe 30>] cfg80211_mlme_auth+0x160/0x1f6 [cfg80211 <HASH:00cd 31>] nl80211_authenticate+0x2e5/0x306 [cfg80211 <HASH:00cd 31>] genl_rcv_msg+0x371/0x3a1 ? nl80211_stop_sched_scan+0xe5/0xe5 [cfg80211 <HASH:00cd 31>] ? genl_rcv+0x36/0x36 netlink_rcv_skb+0x8a/0xf9 genl_rcv+0x28/0x36 netlink_unicast+0x27b/0x3a0 netlink_sendmsg+0x2aa/0x469 sock_sendmsg_nosec+0x49/0x4d ____sys_sendmsg+0xe5/0x213 __sys_sendmsg+0xec/0x157 ? syscall_enter_from_user_mode+0xd7/0x116 do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa99f6e689b | ||||
| CVE-2022-50177 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rcutorture: Fix ksoftirqd boosting timing and iteration The RCU priority boosting can fail in two situations: 1) If (nr_cpus= > maxcpus=), which means if the total number of CPUs is higher than those brought online at boot, then torture_onoff() may later bring up CPUs that weren't online on boot. Now since rcutorture initialization only boosts the ksoftirqds of the CPUs that have been set online on boot, the CPUs later set online by torture_onoff won't benefit from the boost, making RCU priority boosting fail. 2) The ksoftirqd kthreads are boosted after the creation of rcu_torture_boost() kthreads, which opens a window large enough for these rcu_torture_boost() kthreads to wait (despite running at FIFO priority) for ksoftirqds that are still running at SCHED_NORMAL priority. The issues can trigger for example with: ./kvm.sh --configs TREE01 --kconfig "CONFIG_RCU_BOOST=y" [ 34.968561] rcu-torture: !!! [ 34.968627] ------------[ cut here ]------------ [ 35.014054] WARNING: CPU: 4 PID: 114 at kernel/rcu/rcutorture.c:1979 rcu_torture_stats_print+0x5ad/0x610 [ 35.052043] Modules linked in: [ 35.069138] CPU: 4 PID: 114 Comm: rcu_torture_sta Not tainted 5.18.0-rc1 #1 [ 35.096424] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 [ 35.154570] RIP: 0010:rcu_torture_stats_print+0x5ad/0x610 [ 35.198527] Code: 63 1b 02 00 74 02 0f 0b 48 83 3d 35 63 1b 02 00 74 02 0f 0b 48 83 3d 21 63 1b 02 00 74 02 0f 0b 48 83 3d 0d 63 1b 02 00 74 02 <0f> 0b 83 eb 01 0f 8e ba fc ff ff 0f 0b e9 b3 fc ff f82 [ 37.251049] RSP: 0000:ffffa92a0050bdf8 EFLAGS: 00010202 [ 37.277320] rcu: De-offloading 8 [ 37.290367] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001 [ 37.290387] RDX: 0000000000000000 RSI: 00000000ffffbfff RDI: 00000000ffffffff [ 37.290398] RBP: 000000000000007b R08: 0000000000000000 R09: c0000000ffffbfff [ 37.290407] R10: 000000000000002a R11: ffffa92a0050bc18 R12: ffffa92a0050be20 [ 37.290417] R13: ffffa92a0050be78 R14: 0000000000000000 R15: 000000000001bea0 [ 37.290427] FS: 0000000000000000(0000) GS:ffff96045eb00000(0000) knlGS:0000000000000000 [ 37.290448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 37.290460] CR2: 0000000000000000 CR3: 000000001dc0c000 CR4: 00000000000006e0 [ 37.290470] Call Trace: [ 37.295049] <TASK> [ 37.295065] ? preempt_count_add+0x63/0x90 [ 37.295095] ? _raw_spin_lock_irqsave+0x12/0x40 [ 37.295125] ? rcu_torture_stats_print+0x610/0x610 [ 37.295143] rcu_torture_stats+0x29/0x70 [ 37.295160] kthread+0xe3/0x110 [ 37.295176] ? kthread_complete_and_exit+0x20/0x20 [ 37.295193] ret_from_fork+0x22/0x30 [ 37.295218] </TASK> Fix this with boosting the ksoftirqds kthreads from the boosting hotplug callback itself and before the boosting kthreads are created. | ||||
| CVE-2019-11709 | 5 Debian, Mozilla, Opensuse and 2 more | 7 Debian Linux, Firefox, Thunderbird and 4 more | 2025-11-25 | 9.8 Critical |
| Mozilla developers and community members reported memory safety bugs present in Firefox 67 and Firefox ESR 60.7. Some of these bugs showed evidence of memory corruption and we presume that with enough effort that some of these could be exploited to run arbitrary code. This vulnerability affects Firefox ESR < 60.8, Firefox < 68, and Thunderbird < 60.8. | ||||
| CVE-2019-11693 | 3 Linux, Mozilla, Redhat | 4 Linux Kernel, Firefox, Thunderbird and 1 more | 2025-11-25 | N/A |
| The bufferdata function in WebGL is vulnerable to a buffer overflow with specific graphics drivers on Linux. This could result in malicious content freezing a tab or triggering a potentially exploitable crash. *Note: this issue only occurs on Linux. Other operating systems are unaffected.*. This vulnerability affects Thunderbird < 60.7, Firefox < 67, and Firefox ESR < 60.7. | ||||
| CVE-2015-0813 | 3 Linux, Mozilla, Redhat | 4 Linux Kernel, Firefox, Thunderbird and 1 more | 2025-11-25 | N/A |
| Use-after-free vulnerability in the AppendElements function in Mozilla Firefox before 37.0, Firefox ESR 31.x before 31.6, and Thunderbird before 31.6 on Linux, when the Fluendo MP3 plugin for GStreamer is used, allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted MP3 file. | ||||
| CVE-2014-1491 | 8 Canonical, Debian, Fedoraproject and 5 more | 14 Ubuntu Linux, Debian Linux, Fedora and 11 more | 2025-11-25 | N/A |
| Mozilla Network Security Services (NSS) before 3.15.4, as used in Mozilla Firefox before 27.0, Firefox ESR 24.x before 24.3, Thunderbird before 24.3, SeaMonkey before 2.24, and other products, does not properly restrict public values in Diffie-Hellman key exchanges, which makes it easier for remote attackers to bypass cryptographic protection mechanisms in ticket handling by leveraging use of a certain value. | ||||
| CVE-2014-1490 | 8 Canonical, Debian, Fedoraproject and 5 more | 14 Ubuntu Linux, Debian Linux, Fedora and 11 more | 2025-11-25 | N/A |
| Race condition in libssl in Mozilla Network Security Services (NSS) before 3.15.4, as used in Mozilla Firefox before 27.0, Firefox ESR 24.x before 24.3, Thunderbird before 24.3, SeaMonkey before 2.24, and other products, allows remote attackers to cause a denial of service (use-after-free) or possibly have unspecified other impact via vectors involving a resumption handshake that triggers incorrect replacement of a session ticket. | ||||
| CVE-2024-26739 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2025-11-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: don't override retval if we already lost the skb If we're redirecting the skb, and haven't called tcf_mirred_forward(), yet, we need to tell the core to drop the skb by setting the retcode to SHOT. If we have called tcf_mirred_forward(), however, the skb is out of our hands and returning SHOT will lead to UaF. Move the retval override to the error path which actually need it. | ||||
| CVE-2023-52935 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2025-11-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix ->anon_vma race If an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires it to be locked. Page table traversal is allowed under any one of the mmap lock, the anon_vma lock (if the VMA is associated with an anon_vma), and the mapping lock (if the VMA is associated with a mapping); and so to be able to remove page tables, we must hold all three of them. retract_page_tables() bails out if an ->anon_vma is attached, but does this check before holding the mmap lock (as the comment above the check explains). If we racily merged an existing ->anon_vma (shared with a child process) from a neighboring VMA, subsequent rmap traversals on pages belonging to the child will be able to see the page tables that we are concurrently removing while assuming that nothing else can access them. Repeat the ->anon_vma check once we hold the mmap lock to ensure that there really is no concurrent page table access. Hitting this bug causes a lockdep warning in collapse_and_free_pmd(), in the line "lockdep_assert_held_write(&vma->anon_vma->root->rwsem)". It can also lead to use-after-free access. | ||||
| CVE-2023-52482 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2025-11-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/srso: Add SRSO mitigation for Hygon processors Add mitigation for the speculative return stack overflow vulnerability which exists on Hygon processors too. | ||||
| CVE-2022-50151 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix random warning message when driver load Warning log: [ 4.141392] Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xa20 (GFP_ATOMIC). Fix your code! [ 4.150340] CPU: 1 PID: 175 Comm: 1-0050 Not tainted 5.15.5-00039-g2fd9ae1b568c #20 [ 4.158010] Hardware name: Freescale i.MX8QXP MEK (DT) [ 4.163155] Call trace: [ 4.165600] dump_backtrace+0x0/0x1b0 [ 4.169286] show_stack+0x18/0x68 [ 4.172611] dump_stack_lvl+0x68/0x84 [ 4.176286] dump_stack+0x18/0x34 [ 4.179613] kmalloc_fix_flags+0x60/0x88 [ 4.183550] new_slab+0x334/0x370 [ 4.186878] ___slab_alloc.part.108+0x4d4/0x748 [ 4.191419] __slab_alloc.isra.109+0x30/0x78 [ 4.195702] kmem_cache_alloc+0x40c/0x420 [ 4.199725] dma_pool_alloc+0xac/0x1f8 [ 4.203486] cdns3_allocate_trb_pool+0xb4/0xd0 pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags) { ... page = kmalloc(sizeof(*page), mem_flags); page->vaddr = dma_alloc_coherent(pool->dev, pool->allocation, &page->dma, mem_flags); ... } kmalloc was called with mem_flags, which is passed down in cdns3_allocate_trb_pool() and have GFP_DMA32 flags. kmall_fix_flags() report warning. GFP_DMA32 is not useful at all. dma_alloc_coherent() will handle DMA memory region correctly by pool->dev. GFP_DMA32 can be removed safely. | ||||
| CVE-2022-50100 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/core: Do not requeue task on CPU excluded from cpus_mask The following warning was triggered on a large machine early in boot on a distribution kernel but the same problem should also affect mainline. WARNING: CPU: 439 PID: 10 at ../kernel/workqueue.c:2231 process_one_work+0x4d/0x440 Call Trace: <TASK> rescuer_thread+0x1f6/0x360 kthread+0x156/0x180 ret_from_fork+0x22/0x30 </TASK> Commit c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") optimises ttwu by queueing a task that is descheduling on the wakelist, but does not check if the task descheduling is still allowed to run on that CPU. In this warning, the problematic task is a workqueue rescue thread which checks if the rescue is for a per-cpu workqueue and running on the wrong CPU. While this is early in boot and it should be possible to create workers, the rescue thread may still used if the MAYDAY_INITIAL_TIMEOUT is reached or MAYDAY_INTERVAL and on a sufficiently large machine, the rescue thread is being used frequently. Tracing confirmed that the task should have migrated properly using the stopper thread to handle the migration. However, a parallel wakeup from udev running on another CPU that does not share CPU cache observes p->on_cpu and uses task_cpu(p), queues the task on the old CPU and triggers the warning. Check that the wakee task that is descheduling is still allowed to run on its current CPU and if not, wait for the descheduling to complete and select an allowed CPU. | ||||
| CVE-2022-50212 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not allow CHAIN_ID to refer to another table When doing lookups for chains on the same batch by using its ID, a chain from a different table can be used. If a rule is added to a table but refers to a chain in a different table, it will be linked to the chain in table2, but would have expressions referring to objects in table1. Then, when table1 is removed, the rule will not be removed as its linked to a chain in table2. When expressions in the rule are processed or removed, that will lead to a use-after-free. When looking for chains by ID, use the table that was used for the lookup by name, and only return chains belonging to that same table. | ||||
| CVE-2022-50190 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: Fix simplification of devm_spi_register_controller This reverts commit 59ebbe40fb51 ("spi: simplify devm_spi_register_controller"). If devm_add_action() fails in devm_add_action_or_reset(), devm_spi_unregister() will be called, it decreases the refcount of 'ctlr->dev' to 0, then it will cause uaf in the drivers that calling spi_put_controller() in error path. | ||||
| CVE-2022-50115 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-topology: Prevent double freeing of ipc_control_data via load_bytes We have sanity checks for byte controls and if any of the fail the locally allocated scontrol->ipc_control_data is freed up, but not set to NULL. On a rollback path of the error the higher level code will also try to free the scontrol->ipc_control_data which will eventually going to lead to memory corruption as double freeing memory is not a good thing. | ||||
| CVE-2022-50117 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio: Split migration ops from main device ops vfio core checks whether the driver sets some migration op (e.g. set_state/get_state) and accordingly calls its op. However, currently mlx5 driver sets the above ops without regards to its migration caps. This might lead to unexpected usage/Oops if user space may call to the above ops even if the driver doesn't support migration. As for example, the migration state_mutex is not initialized in that case. The cleanest way to manage that seems to split the migration ops from the main device ops, this will let the driver setting them separately from the main ops when it's applicable. As part of that, validate ops construction on registration and include a check for VFIO_MIGRATION_STOP_COPY since the uAPI claims it must be set in migration_flags. HISI driver was changed as well to match this scheme. This scheme may enable down the road to come with some extra group of ops (e.g. DMA log) that can be set without regards to the other options based on driver caps. | ||||
| CVE-2018-4878 | 6 Adobe, Apple, Google and 3 more | 11 Flash Player, Macos, Chrome Os and 8 more | 2025-11-18 | 7.8 High |
| A use-after-free vulnerability was discovered in Adobe Flash Player before 28.0.0.161. This vulnerability occurs due to a dangling pointer in the Primetime SDK related to media player handling of listener objects. A successful attack can lead to arbitrary code execution. This was exploited in the wild in January and February 2018. | ||||
| CVE-2018-5002 | 6 Adobe, Apple, Google and 3 more | 12 Flash Player, Flash Player Desktop Runtime, Mac Os X and 9 more | 2025-11-18 | 7.8 High |
| Adobe Flash Player versions 29.0.0.171 and earlier have a Stack-based buffer overflow vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user. | ||||
| CVE-2022-50095 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Cleanup CPU timers before freeing them during exec Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a task") started looking up tasks by PID when deleting a CPU timer. When a non-leader thread calls execve, it will switch PIDs with the leader process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find the task because the timer still points out to the old PID. That means that armed timers won't be disarmed, that is, they won't be removed from the timerqueue_list. exit_itimers will still release their memory, and when that list is later processed, it leads to a use-after-free. Clean up the timers from the de-threaded task before freeing them. This prevents a reported use-after-free. | ||||
| CVE-2022-50093 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE) KASAN reports: [ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) [ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0 [ 4.683454][ T0] [ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1 [ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016 [ 4.703196][ T0] Call Trace: [ 4.706334][ T0] <TASK> [ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) after converting the type of the first argument (@nr, bit number) of arch_test_bit() from `long` to `unsigned long`[0]. Under certain conditions (for example, when ACPI NUMA is disabled via command line), pxm_to_node() can return %NUMA_NO_NODE (-1). It is valid 'magic' number of NUMA node, but not valid bit number to use in bitops. node_online() eventually descends to test_bit() without checking for the input, assuming it's on caller side (which might be good for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads to an insane array index when calculating bit position in memory. For now, add an explicit check for @node being not %NUMA_NO_NODE before calling test_bit(). The actual logics didn't change here at all. [0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d | ||||