| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The IEEE 1588 (PTP) port implementation in subsys/net/lib/ptp/port.c adopted the logMessageInterval field of a received Delay_Resp message without any validation. port_delay_resp_msg_process() stored the raw wire value (a full-range int8_t) into port_ds.log_min_delay_req_interval, and that value is later used as a shift count by port_timer_set_timeout() when the Delay_Req timer is armed. Values below about -30 truncate the computed timeout to zero, and values with a magnitude of 64 or more perform an undefined shift of a uint64_t; the standards-defined "not applicable" encoding 0x7F fell into the latter case as well.
PTP messages are received over unauthenticated link-local traffic (UDP multicast on 224.0.1.129, IPv6 multicast, or raw IEEE 802.3), and the handler accepts a Delay_Resp from any sender as long as the port is a time receiver using the end-to-end delay mechanism and the message echoes the port identity and a pending sequence id — both of which the victim itself broadcasts in its Delay_Req. Any node on the same link can therefore inject a single crafted Delay_Resp, or simply become the time transmitter and advertise the bogus interval.
Once the delay timer is armed with a zero timeout, the cooperative PTP thread re-arms and retransmits a Delay_Req on every tick. Each transmission takes a buffer from the fixed CONFIG_PTP_MSG_POLL_SIZE message slab (default 10) and holds it on port->delay_req_list for three seconds, so the slab is emptied within milliseconds and ptp_msg_alloc() then blocks with K_FOREVER inside the only thread that frees those buffers — permanently stalling time synchronization until reboot. Where a transmit-timestamp callback on another thread keeps recycling buffers, the result is instead a sustained multicast Delay_Req flood and continuous CPU consumption. There is no memory corruption and no disclosure of data; the impact is availability of the PTP subsystem and of the local network segment.
The fix rejects intervals outside a representable range and treats 0x7F as "not applicable" as required by IEEE 1588-2019 Table 42. The equivalent unchecked adoption of logMessageInterval from Sync messages in port_sync_msg_process(), a weaker variant of the same issue, is fixed by the companion change 334bf57f416f (#118150), which applies the same range check, ignores the field for unicast Sync messages and treats 0x7F as not applicable. |
| An authorization bypass in channel-edit.php in Revive Adserver 6.0.8 and earlier allows an authenticated manager to create a delivery rule set belonging to another agency by changing the submitted agencyid parameter. The server trusts the submitted agency identifier when inserting the new rule set, allowing unauthorized creation of objects in another agency's account. The issue is fixed in Revive Adserver 6.0.9 by obtaining the agency identifier from the authenticated account rather than submitted form data and removing the agency identifier from the form's hidden fields. |
| An improper neutralization of CRLF sequences vulnerability in the SNMP API in Synology DiskStation Manager (DSM) before 7.3.2-86009-5 and 7.4.1-90080-1 allows remote authenticated users with administrator privileges to read or write arbitrary files and conduct denial-of-service attacks. |
| A reachable assertion vulnerability in the synoscgi in Synology DiskStation Manager (DSM) before 7.3.2-86009-5 and 7.4.1-90080-1 allows remote attackers to conduct limited denial-of-service attacks. |
| An authentication bypass using an alternate path or channel vulnerability in the rsync in Synology DiskStation Manager (DSM) before 7.2.1-69057-13, 7.2.2-72806-10, 7.3.2-86009-5, and 7.4.1-90080-1 allows remote attackers to read specific files, write arbitrary files, and conduct limited denial-of-service attacks. |
| A flaw was found in Foreman’s Api::V2::PersonalAccessTokensController, where Foreman::Controller::UserAware#find_user resolves the target account using User.find(params[:user_id]) without applying the required parent-user authorization check. An attacker with the create_personal_access_tokens permission can therefore invoke POST /api/v2/users/:user_id/personal_access_tokens with another user’s ID and create a Personal Access Token on their behalf. The resulting plaintext token is returned in the API response, while PersonalAccessToken#check_permissions_after_save only validates create_personal_access_tokens on the token and does not enforce edit_users authorization on the target user. The attacker can then use the forged token to authenticate as the victim, potentially resulting in complete account takeover, including administrator accounts. |
| Zipline before 4.6.4 contains a rate limit bypass vulnerability that allows remote attackers to evade request limits by varying query strings or supplying the x-zipline-p-filename header. Attackers can append differing query parameters to login and file or short-link password verification endpoints to perform credential guessing beyond the intended rate limits. |
| The HTTP/2 front-end of the Zephyr HTTP server aliased connection receive state as a scratch output. In subsys/net/lib/http/http_server_http2.c, handle_http2_static_fs_resource() passed &client->data_len as the file_size out-parameter of http_server_find_file(). client->data_len is the count of unprocessed bytes remaining in the fixed-size per-connection receive buffer client->buffer[CONFIG_HTTP_SERVER_CLIENT_BUFFER_SIZE] (256 bytes by default), an invariant every frame handler and the socket receive path rely on. Serving any static file therefore replaced that bounded value with the file's on-disk size, and nothing resets it afterwards.
The defect is reached by an unauthenticated HTTP/2 GET for any file under the web root, in applications that register a static-filesystem resource (HTTP_RESOURCE_TYPE_STATIC_FS) with CONFIG_FILE_SYSTEM=y; CONFIG_HTTP_SERVER_VERSION_2 is enabled by default and no TLS or credentials are required on this path. Once client->data_len exceeds the buffer size, the frame dispatch loop in subsys/net/lib/http/http_server_core.c keeps parsing past the end of the received data, and the peer controls the bytes at client->cursor, so it can choose which fabricated frame the state machine consumes next by appending bytes after its request.
The inflated length defeats the only guards on the buffer. parse_http_frame_header() and the per-frame handlers read and skip up to a 24-bit frame length beyond the buffer (out-of-bounds read); the compaction memmove(client->buffer, client->cursor, client->data_len) at the end of request handling copies the file-size number of bytes into the 256-byte buffer, overflowing the rest of struct http_client_ctx — including the current_detail/current_stream pointers, the parser_settings function-pointer table and the inactivity_timer work handler — and the adjacent client contexts in static memory; and the subsequent zsock_recv(client->fd, client->buffer + client->data_len, sizeof(client->buffer) - client->data_len, 0) underflows its size argument, writing attacker-supplied data of attacker-chosen length out of bounds.
The impact is remote memory corruption in the server's single address space: at minimum a crash or hang of the device, and plausibly control-data overwrite leading to code execution. The HTTP/1 and HTTP/3 static-filesystem handlers already used a local variable and are unaffected; the fix makes the HTTP/2 handler use a local size_t file_size as well. |
| An improper permissions vulnerability was reported in Lenovo System Update that could allow a local authenticated user to execute code with elevated privileges. |
| A deserialization of untrusted data vulnerability was discovered in Lenovo System Update that could allow a local authenticated user to execute code with elevated privileges. |
| A cross-site request forgery vulnerability in tracker-invocation.php in Revive Adserver 6.0.8 and earlier allows an attacker to modify a tracker's name, description or advertiser assignment using an authenticated victim's permissions. A leftover state-changing handler accepts request parameters without verifying a CSRF token, although it is not used by the normal invocation-tag interface. Exploitation requires victim interaction and a request path that carries the victim's session credentials. The issue is fixed in Revive Adserver 6.0.9 by removing the unused tracker-modification handler. |
| A missing critical step in authentication vulnerability in the Auth API in Synology DiskStation Manager (DSM) before 7.3.2-86009-5 and 7.4.1-90080-1 allows remote authenticated users to read or write arbitrary files and conduct denial-of-service attacks. |
| An improper neutralization of special elements used in an SQL command vulnerability in the User API in Synology DiskStation Manager (DSM) before 7.3.2-86009-5 and 7.4.1-90080-1 allows remote attackers with control over a compromised LDAP or Active Directory server to read or write arbitrary files and conduct denial-of-service attacks. |
| An improper neutralization of special elements used in an OS command vulnerability in the VPN API in Synology DiskStation Manager (DSM) before 7.3.2-86009-5 and 7.4.1-90080-1 allows remote authenticated users with administrator privileges to read or write arbitrary files and conduct denial-of-service attacks. |
| An improper neutralization of input during web page generation vulnerability in the DSMNotify in Synology DiskStation Manager (DSM) before 7.3.2-86009-5 and 7.4.1-90080-1 allows remote authenticated users to read or write specific files. |
| A server-side request forgery vulnerability in the Credential API in Synology DiskStation Manager (DSM) before 7.3.2-86009-5 and 7.4.1-90080-1 allows remote authenticated users to read specific files. |
| A missing authorization vulnerability in the TaskScheduler API in Synology DiskStation Manager (DSM) before 7.3.2-86009-5 and 7.4.1-90080-1 allows remote authenticated users to write specific files. |
| An improper neutralization of special elements used in an SQL command vulnerability in the Auth API in Synology DiskStation Manager (DSM) before 7.2.1-69057-13, 7.2.2-72806-10, 7.3.2-86009-5, and 7.4.1-90080-1 allows remote attackers to read or write arbitrary files and conduct denial-of-service attacks. |
| Zipline before 4.7.0 contains a race condition vulnerability that allows users to bypass invitation usage limits, upload storage quotas, and shortened-URL quotas through concurrent requests. Attackers can send overlapping registration, upload, or URL creation requests that pass checks against stale state, creating extra accounts and exceeding administrator-configured resource quotas. |
| OpenEMR before 8.4.0 contains an improper authorization vulnerability in ScopeRepository::finalizeScopes() that allows read-only SMART/OAuth clients to obtain write scopes because ScopeEntity::containsScope() ignores registered permissions. Attackers with a client registered for user/<resource>.read can request user/<resource>.write to create, update, and delete appointments or patient data. |