Export limit exceeded: 421366 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (421366 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43453 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop() pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the to_offset argument on every iteration, including the last one where i == m->field_count - 1. This reads one element past the end of the stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS] with NFT_PIPAPO_MAX_FIELDS == 16). Although pipapo_unmap() returns early when is_last is true without using the to_offset value, the argument is evaluated at the call site before the function body executes, making this a genuine out-of-bounds stack read confirmed by KASAN: BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables] Read of size 4 at addr ffff8000810e71a4 This frame has 1 object: [32, 160) 'rulemap' The buggy address is at offset 164 -- exactly 4 bytes past the end of the rulemap array. Pass 0 instead of rulemap[i + 1].n on the last iteration to avoid the out-of-bounds read. | ||||
| CVE-2026-43451 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue entry from the queue data structures, taking ownership of the entry. For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN present but NFQA_VLAN_TCI missing), the function returns immediately without freeing the dequeued entry or its sk_buff. This leaks the nf_queue_entry, its associated sk_buff, and all held references (net_device refcounts, struct net refcount). Repeated triggering exhausts kernel memory. Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict on the error path, consistent with other error handling in this file. | ||||
| CVE-2026-43450 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table() nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label inside the for loop body. When the "last" helper saved in cb->args[1] is deleted between dump rounds, every entry fails the (cur != last) check, so cb->args[1] is never cleared. The for loop finishes with cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back into the loop body bypassing the bounds check, causing an 8-byte out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize]. The 'goto restart' block was meant to re-traverse the current bucket when "last" is no longer found, but it was placed after the for loop instead of inside it. Move the block into the for loop body so that the restart only occurs while cb->args[0] is still within bounds. BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0 Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131 Call Trace: nfnl_cthelper_dump_table+0x9f/0x1b0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 sock_recvmsg+0xde/0xf0 __sys_recvfrom+0x150/0x200 __x64_sys_recvfrom+0x76/0x90 do_syscall_64+0xc3/0x6e0 Allocated by task 1: __kvmalloc_node_noprof+0x21b/0x700 nf_ct_alloc_hashtable+0x65/0xd0 nf_conntrack_helper_init+0x21/0x60 nf_conntrack_init_start+0x18d/0x300 nf_conntrack_standalone_init+0x12/0xc0 | ||||
| CVE-2026-43449 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set dev->online_queues is a count incremented in nvme_init_queue. Thus, valid indices are 0 through dev->online_queues − 1. This patch fixes the loop condition to ensure the index stays within the valid range. Index 0 is excluded because it is the admin queue. KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74 CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: nvme-reset-wq nvme_reset_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xea/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x5d0 mm/kasan/report.c:482 kasan_report+0xdc/0x110 mm/kasan/report.c:595 __asan_report_load2_noabort+0x18/0x20 mm/kasan/report_generic.c:379 nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 nvme_reset_work+0x36b/0x8c0 drivers/nvme/host/pci.c:3252 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> Allocated by task 34 on cpu 1 at 4.241550s: kasan_save_stack+0x2c/0x60 mm/kasan/common.c:57 kasan_save_track+0x1c/0x70 mm/kasan/common.c:78 kasan_save_alloc_info+0x3c/0x50 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xb5/0xc0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5657 [inline] __kmalloc_node_noprof+0x2bf/0x8d0 mm/slub.c:5663 kmalloc_array_node_noprof include/linux/slab.h:1075 [inline] nvme_pci_alloc_dev drivers/nvme/host/pci.c:3479 [inline] nvme_probe+0x2f1/0x1820 drivers/nvme/host/pci.c:3534 local_pci_probe+0xef/0x1c0 drivers/pci/pci-driver.c:324 pci_call_probe drivers/pci/pci-driver.c:392 [inline] __pci_device_probe drivers/pci/pci-driver.c:417 [inline] pci_device_probe+0x743/0x920 drivers/pci/pci-driver.c:451 call_driver_probe drivers/base/dd.c:583 [inline] really_probe+0x29b/0xb70 drivers/base/dd.c:661 __driver_probe_device+0x3b0/0x4a0 drivers/base/dd.c:803 driver_probe_device+0x56/0x1f0 drivers/base/dd.c:833 __driver_attach_async_helper+0x155/0x340 drivers/base/dd.c:1159 async_run_entry_fn+0xa6/0x4b0 kernel/async.c:129 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 The buggy address belongs to the object at ffff88800592a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 244 bytes to the right of allocated 1152-byte region [ffff88800592a000, ffff88800592a480) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5928 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0xfffffc0000040(head|node=0|zone=1|lastcpupid=0x1fffff) page_type: f5(slab) raw: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 000fffffc0000040 ffff888001042000 00000 ---truncated--- | ||||
| CVE-2026-43448 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix race bug in nvme_poll_irqdisable() In the following scenario, pdev can be disabled between (1) and (3) by (2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2). This causes IRQ warning because it tries to enable INTx IRQ that has never been disabled before. To fix this, save IRQ number into a local variable and ensure disable_irq() and enable_irq() operate on the same IRQ number. Even if pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and enable_irq() on a stale IRQ number is still valid and safe, and the depth accounting reamins balanced. task 1: nvme_poll_irqdisable() disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1) enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(3) task 2: nvme_reset_work() nvme_dev_disable() pdev->msix_enable = 0; ...(2) crash log: ------------[ cut here ]------------ Unbalanced enable for IRQ 10 WARNING: kernel/irq/manage.c:753 at __enable_irq+0x102/0x190 kernel/irq/manage.c:753, CPU#1: kworker/1:0H/26 Modules linked in: CPU: 1 UID: 0 PID: 26 Comm: kworker/1:0H Not tainted 6.19.0-dirty #9 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_timeout_work RIP: 0010:__enable_irq+0x107/0x190 kernel/irq/manage.c:753 Code: ff df 48 89 fa 48 c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 79 48 8d 3d 2e 7a 3f 05 41 8b 74 24 2c <67> 48 0f b9 3a e8 ef b9 21 00 5b 41 5c 5d e9 46 54 66 03 e8 e1 b9 RSP: 0018:ffffc900001bf550 EFLAGS: 00010046 RAX: 0000000000000007 RBX: 0000000000000000 RCX: ffffffffb20c0e90 RDX: 0000000000000000 RSI: 000000000000000a RDI: ffffffffb74b88f0 RBP: ffffc900001bf560 R08: ffff88800197cf00 R09: 0000000000000001 R10: 0000000000000003 R11: 0000000000000003 R12: ffff8880012a6000 R13: 1ffff92000037eae R14: 000000000000000a R15: 0000000000000293 FS: 0000000000000000(0000) GS:ffff8880b49f7000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555da4a25fa8 CR3: 00000000208e8000 CR4: 00000000000006f0 Call Trace: <TASK> enable_irq+0x121/0x1e0 kernel/irq/manage.c:797 nvme_poll_irqdisable+0x162/0x1c0 drivers/nvme/host/pci.c:1494 nvme_timeout+0x965/0x14b0 drivers/nvme/host/pci.c:1744 blk_mq_rq_timed_out block/blk-mq.c:1653 [inline] blk_mq_handle_expired+0x227/0x2d0 block/blk-mq.c:1721 bt_iter+0x2fc/0x3a0 block/blk-mq-tag.c:292 __sbitmap_for_each_set include/linux/sbitmap.h:269 [inline] sbitmap_for_each_set include/linux/sbitmap.h:290 [inline] bt_for_each block/blk-mq-tag.c:324 [inline] blk_mq_queue_tag_busy_iter+0x969/0x1e80 block/blk-mq-tag.c:536 blk_mq_timeout_work+0x627/0x870 block/blk-mq.c:1763 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> irq event stamp: 74478 hardirqs last enabled at (74477): [<ffffffffb5720a9c>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:159 [inline] hardirqs last enabled at (74477): [<ffffffffb5720a9c>] _raw_spin_unlock_irq+0x2c/0x60 kernel/locking/spinlock.c:202 hardirqs last disabled at (74478): [<ffffffffb57207b5>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (74478): [<ffffffffb57207b5>] _raw_spin_lock_irqsave+0x85/0xa0 kernel/locking/spinlock.c:162 softirqs last enabled at (74304): [<ffffffffb1e9466c>] __do_softirq kernel/softirq.c:656 [inline] softirqs last enabled at (74304): [<ffffffffb1e9466c>] invoke_softirq kernel/softirq.c:496 [inline] softirqs last enabled at (74304): [<ffffffffb1e9466c>] __irq_exit_rcu+0xdc/0x120 ---truncated--- | ||||
| CVE-2026-43445 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: e1000/e1000e: Fix leak in DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented after a successful mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping would leak. In these commits, a faulty while condition caused an infinite loop in dma_error: Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e driver") Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver") Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()") fixed the infinite loop, but introduced the off-by-one error. This issue may still exist in the igbvf driver, but I did not address it in this patch. | ||||
| CVE-2026-43444 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unreserve bo if queue update failed Error handling path should unreserve bo then return failed. (cherry picked from commit c24afed7de9ecce341825d8ab55a43a254348b33) | ||||
| CVE-2026-43443 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-mach-common: Add missing error check for clock acquisition The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not check the return values of clk_get(). This could lead to a kernel crash when the invalid pointers are later dereferenced by clock core functions. Fix this by: 1. Changing clk_get() to the device-managed devm_clk_get(). 2. Adding IS_ERR() checks immediately after each clock acquisition. | ||||
| CVE-2026-43440 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mana: Null service_wq on setup error to prevent double destroy In mana_gd_setup() error path, set gc->service_wq to NULL after destroy_workqueue() to match the cleanup in mana_gd_cleanup(). This prevents a use-after-free if the workqueue pointer is checked after a failed setup. | ||||
| CVE-2026-43439 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cgroup: fix race between task migration and iteration When a task is migrated out of a css_set, cgroup_migrate_add_task() first moves it from cset->tasks to cset->mg_tasks via: list_move_tail(&task->cg_list, &cset->mg_tasks); If a css_task_iter currently has it->task_pos pointing to this task, css_set_move_task() calls css_task_iter_skip() to keep the iterator valid. However, since the task has already been moved to ->mg_tasks, the iterator is advanced relative to the mg_tasks list instead of the original tasks list. As a result, remaining tasks on cset->tasks, as well as tasks queued on cset->mg_tasks, can be skipped by iteration. Fix this by calling css_set_skip_task_iters() before unlinking task->cg_list from cset->tasks. This advances all active iterators to the next task on cset->tasks, so iteration continues correctly even when a task is concurrently being migrated. This race is hard to hit in practice without instrumentation, but it can be reproduced by artificially slowing down cgroup_procs_show(). For example, on an Android device a temporary /sys/kernel/cgroup/cgroup_test knob can be added to inject a delay into cgroup_procs_show(), and then: 1) Spawn three long-running tasks (PIDs 101, 102, 103). 2) Create a test cgroup and move the tasks into it. 3) Enable a large delay via /sys/kernel/cgroup/cgroup_test. 4) In one shell, read cgroup.procs from the test cgroup. 5) Within the delay window, in another shell migrate PID 102 by writing it to a different cgroup.procs file. Under this setup, cgroup.procs can intermittently show only PID 101 while skipping PID 103. Once the migration completes, reading the file again shows all tasks as expected. Note that this change does not allow removing the existing css_set_skip_task_iters() call in css_set_move_task(). The new call in cgroup_migrate_add_task() only handles iterators that are racing with migration while the task is still on cset->tasks. Iterators may also start after the task has been moved to cset->mg_tasks. If we dropped css_set_skip_task_iters() from css_set_move_task(), such iterators could keep task_pos pointing to a migrating task, causing css_task_iter_advance() to malfunction on the destination css_set, up to and including crashes or infinite loops. The race window between migration and iteration is very small, and css_task_iter is not on a hot path. In the worst case, when an iterator is positioned on the first thread of the migrating process, cgroup_migrate_add_task() may have to skip multiple tasks via css_set_skip_task_iters(). However, this only happens when migration and iteration actually race, so the performance impact is negligible compared to the correctness fix provided here. | ||||
| CVE-2026-43436 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces The Scarlett2 mixer quirk in USB-audio driver may hit a NULL dereference when a malformed USB descriptor is passed, since it assumes the presence of an endpoint in the parsed interface in scarlett2_find_fc_interface(), as reported by fuzzer. For avoiding the NULL dereference, just add the sanity check of bNumEndpoints and skip the invalid interface. | ||||
| CVE-2026-43432 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix memory leak in xhci_disable_slot() xhci_alloc_command() allocates a command structure and, when the second argument is true, also allocates a completion structure. Currently, the error handling path in xhci_disable_slot() only frees the command structure using kfree(), causing the completion structure to leak. Use xhci_free_command() instead of kfree(). xhci_free_command() correctly frees both the command structure and the associated completion structure. Since the command structure is allocated with zero-initialization, command->in_ctx is NULL and will not be erroneously freed by xhci_free_command(). This bug was found using an experimental static analysis tool we are developing. The tool is based on the LLVM framework and is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available, but we plan to open-source it after our research is published. The bug was originally detected on v6.13-rc1 using our static analysis tool, and we have verified that the issue persists in the latest mainline kernel. We performed build testing on x86_64 with allyesconfig using GCC=11.4.0. Since triggering these error paths in xhci_disable_slot() requires specific hardware conditions or abnormal state, we were unable to construct a test case to reliably trigger these specific error paths at runtime. | ||||
| CVE-2026-43429 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely. | ||||
| CVE-2026-43428 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Limit the length of unkillable synchronous timeouts The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short enough to avoid triggering the kernel's hung-task detector. In addition, clear up the ambiguity of negative timeout values by treating them the same as 0, i.e., using the maximum allowed timeout. | ||||
| CVE-2026-43427 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers. | ||||
| CVE-2026-43425 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: kill download URB on timeout mdc800_device_read() submits download_urb and waits for completion. If the timeout fires and the device has not responded, the function returns without killing the URB, leaving it active. A subsequent read() resubmits the same URB while it is still in-flight, triggering the WARN in usb_submit_urb(): "URB submitted while active" Check the return value of wait_event_timeout() and kill the URB if it indicates timeout, ensuring the URB is complete before its status is inspected or the URB is resubmitted. Similar to - commit 372c93131998 ("USB: yurex: fix control-URB timeout handling") - commit b98d5000c505 ("media: rc: iguanair: handle timeouts") | ||||
| CVE-2026-43420 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix i_nlink underrun during async unlink During async unlink, we drop the `i_nlink` counter before we receive the completion (that will eventually update the `i_nlink`) because "we assume that the unlink will succeed". That is not a bad idea, but it races against deletions by other clients (or against the completion of our own unlink) and can lead to an underrun which emits a WARNING like this one: WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68 Modules linked in: CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655 Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drop_nlink+0x50/0x68 lr : ceph_unlink+0x6c4/0x720 sp : ffff80012173bc90 x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680 x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647 x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203 x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365 x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74 x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94 x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002 x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8 Call trace: drop_nlink+0x50/0x68 (P) vfs_unlink+0xb0/0x2e8 do_unlinkat+0x204/0x288 __arm64_sys_unlinkat+0x3c/0x80 invoke_syscall.constprop.0+0x54/0xe8 do_el0_svc+0xa4/0xc8 el0_svc+0x18/0x58 el0t_64_sync_handler+0x104/0x130 el0t_64_sync+0x154/0x158 In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion. Meanwhile, between this call and the following drop_nlink() call, a worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own completion). These will lead to a set_nlink() call, updating the `i_nlink` counter to the value received from the MDS. If that new `i_nlink` value happens to be zero, it is illegal to decrement it further. But that is exactly what ceph_unlink() will do then. The WARNING can be reproduced this way: 1. Force async unlink; only the async code path is affected. Having no real clue about Ceph internals, I was unable to find out why the MDS wouldn't give me the "Fxr" capabilities, so I patched get_caps_for_async_unlink() to always succeed. (Note that the WARNING dump above was found on an unpatched kernel, without this kludge - this is not a theoretical bug.) 2. Add a sleep call after ceph_mdsc_submit_request() so the unlink completion gets handled by a worker thread before drop_nlink() is called. This guarantees that the `i_nlink` is already zero before drop_nlink() runs. The solution is to skip the counter decrement when it is already zero, but doing so without a lock is still racy (TOCTOU). Since ceph_fill_inode() and handle_cap_grant() both hold the `ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this seems like the proper lock to protect the `i_nlink` updates. I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using `afs_vnode.cb_lock`). All three have the zero check as well. | ||||
| CVE-2026-43419 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leaks in ceph_mdsc_build_path() Add __putname() calls to error code paths that did not free the "path" pointer obtained by __getname(). If ownership of this pointer is not passed to the caller via path_info.path, the function must free it before returning. | ||||
| CVE-2026-43416 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc, perf: Check that current->mm is alive before getting user callchain It may happen that mm is already released, which leads to kernel panic. This adds the NULL check for current->mm, similarly to commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain"). I was getting this panic when running a profiling BPF program (profile.py from bcc-tools): [26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0) [26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588 [26215.051952] Faulting instruction address: 0xc00000000020fac0 [26215.051957] Oops: Kernel access of bad area, sig: 11 [#1] [...] [26215.052049] Call Trace: [26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable) [26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30 [26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360 [26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0 [26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274 [...] In addition, move storing the top-level stack entry to generic perf_callchain_user to make sure the top-evel entry is always captured, even if current->mm is NULL. [Maddy: fixed message to avoid checkpatch format style error] | ||||
| CVE-2026-43413 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Fix NULL pointer exception during user_scan() user_scan() invokes updated sas_user_scan() for channel 0, and if successful, iteratively scans remaining channels (1 to shost->max_channel) via scsi_scan_host_selected() in commit 37c4e72b0651 ("scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans"). However, hisi_sas supports only one channel, and the current value of max_channel is 1. sas_user_scan() for channel 1 will trigger the following NULL pointer exception: [ 441.554662] Unable to handle kernel NULL pointer dereference at virtual address 00000000000008b0 [ 441.554699] Mem abort info: [ 441.554710] ESR = 0x0000000096000004 [ 441.554718] EC = 0x25: DABT (current EL), IL = 32 bits [ 441.554723] SET = 0, FnV = 0 [ 441.554726] EA = 0, S1PTW = 0 [ 441.554730] FSC = 0x04: level 0 translation fault [ 441.554735] Data abort info: [ 441.554737] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 441.554742] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 441.554747] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 441.554752] user pgtable: 4k pages, 48-bit VAs, pgdp=00000828377a6000 [ 441.554757] [00000000000008b0] pgd=0000000000000000, p4d=0000000000000000 [ 441.554769] Internal error: Oops: 0000000096000004 [#1] SMP [ 441.629589] Modules linked in: arm_spe_pmu arm_smmuv3_pmu tpm_tis_spi hisi_uncore_sllc_pmu hisi_uncore_pa_pmu hisi_uncore_l3c_pmu hisi_uncore_hha_pmu hisi_uncore_ddrc_pmu hisi_uncore_cpa_pmu hns3_pmu hisi_ptt hisi_pcie_pmu tpm_tis_core spidev spi_hisi_sfc_v3xx hisi_uncore_pmu spi_dw_mmio fuse hclge hclge_common hisi_sec2 hisi_hpre hisi_zip hisi_qm hns3 hisi_sas_v3_hw sm3_ce sbsa_gwdt hnae3 hisi_sas_main uacce hisi_dma i2c_hisi dm_mirror dm_region_hash dm_log dm_mod [ 441.670819] CPU: 46 UID: 0 PID: 6994 Comm: bash Kdump: loaded Not tainted 7.0.0-rc2+ #84 PREEMPT [ 441.691327] pstate: 81400009 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 441.698277] pc : sas_find_dev_by_rphy+0x44/0x118 [ 441.702896] lr : sas_find_dev_by_rphy+0x3c/0x118 [ 441.707502] sp : ffff80009abbba40 [ 441.710805] x29: ffff80009abbba40 x28: ffff082819a40008 x27: ffff082810c37c08 [ 441.717930] x26: ffff082810c37c28 x25: ffff082819a40290 x24: ffff082810c37c00 [ 441.725054] x23: 0000000000000000 x22: 0000000000000001 x21: ffff082819a40000 [ 441.732179] x20: ffff082819a40290 x19: 0000000000000000 x18: 0000000000000020 [ 441.739304] x17: 0000000000000000 x16: ffffb5dad6bda690 x15: 00000000ffffffff [ 441.746428] x14: ffff082814c3b26c x13: 00000000ffffffff x12: ffff082814c3b26a [ 441.753553] x11: 00000000000000c0 x10: 000000000000003a x9 : ffffb5dad5ea94f4 [ 441.760678] x8 : 000000000000003a x7 : ffff80009abbbab0 x6 : 0000000000000030 [ 441.767802] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 441.774926] x2 : ffff08280f35a300 x1 : ffffb5dad7127180 x0 : 0000000000000000 [ 441.782053] Call trace: [ 441.784488] sas_find_dev_by_rphy+0x44/0x118 (P) [ 441.789095] sas_target_alloc+0x24/0xb0 [ 441.792920] scsi_alloc_target+0x290/0x330 [ 441.797010] __scsi_scan_target+0x88/0x258 [ 441.801096] scsi_scan_channel+0x74/0xb8 [ 441.805008] scsi_scan_host_selected+0x170/0x188 [ 441.809615] sas_user_scan+0xfc/0x148 [ 441.813267] store_scan+0x10c/0x180 [ 441.816743] dev_attr_store+0x20/0x40 [ 441.820398] sysfs_kf_write+0x84/0xa8 [ 441.824054] kernfs_fop_write_iter+0x130/0x1c8 [ 441.828487] vfs_write+0x2c0/0x370 [ 441.831880] ksys_write+0x74/0x118 [ 441.835271] __arm64_sys_write+0x24/0x38 [ 441.839182] invoke_syscall+0x50/0x120 [ 441.842919] el0_svc_common.constprop.0+0xc8/0xf0 [ 441.847611] do_el0_svc+0x24/0x38 [ 441.850913] el0_svc+0x38/0x158 [ 441.854043] el0t_64_sync_handler+0xa0/0xe8 [ 441.858214] el0t_64_sync+0x1ac/0x1b0 [ 441.861865] Code: aa1303e0 97ff70a8 34ffff80 d10a4273 (f9445a75) [ 441.867946] ---[ end trace 0000000000000000 ]--- Therefore ---truncated--- | ||||