| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init()
devm_ioremap() returns NULL on error. Currently, mt7915_mmio_wed_init()
does not check for this case, which results in a NULL pointer
dereference.
Prevent null pointer dereference in mt7915_mmio_wed_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: lenovo_se30_wdt: Fix possible devm_ioremap() NULL pointer dereference in lenovo_se30_wdt_probe()
devm_ioremap() returns NULL on error. Currently, lenovo_se30_wdt_probe()
does not check for this case, which results in a NULL pointer
dereference.
Add NULL check after devm_ioremap() to prevent this issue. |
| A flaw was found in Shim when an error happened while creating a new ESL variable. If Shim fails to create the new variable, it tries to print an error message to the user; however, the number of parameters used by the logging function doesn't match the format string used by it, leading to a crash under certain circumstances. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max77705: Fix workqueue error handling in probe
The create_singlethread_workqueue() doesn't return error pointers, it
returns NULL. Also cleanup the workqueue on the error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt()
fpga_mgr_test_img_load_sgt() allocates memory for sgt using
kunit_kzalloc() however it does not check if the allocation failed.
It then passes sgt to sg_alloc_table(), which passes it to
__sg_alloc_table(). This function calls memset() on sgt in an attempt to
zero it out. If the allocation fails then sgt will be NULL and the
memset will trigger a NULL pointer dereference.
Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: prevent a NULL deref in rtnl_create_link()
At the time rtnl_create_link() is running, dev->netdev_ops is NULL,
we must not use netdev_lock_ops() or risk a NULL deref if
CONFIG_NET_SHAPER is defined.
Use netif_set_group() instead of dev_set_group().
RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline]
RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82
Call Trace:
<TASK>
rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674
rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813
__rtnl_newlink net/core/rtnetlink.c:3940 [inline]
rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Add NULL check in mt7996_thermal_init
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt7996_thermal_init() is not checked.
Add NULL check in mt7996_thermal_init(), to handle kernel NULL
pointer dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: tps6594-pfsm: Add NULL pointer check in tps6594_pfsm_probe()
The returned value, pfsm->miscdev.name, from devm_kasprintf()
could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: zynqmp_nvmem: unbreak driver after cleanup
Commit 29be47fcd6a0 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup")
changed the driver to expect the device pointer to be passed as the
"context", but in nvmem the context parameter comes from nvmem_config.priv
which is never set - Leading to null pointer exceptions when the device is
accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
The cs40l50_upload_owt() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails. |
| A NULL pointer dereference vulnerability was discovered in radare2 6.0.5 and earlier within the load() function of bin_dyldcache.c. Processing a crafted file can cause a segmentation fault and crash the program. |
| A NULL pointer dereference vulnerability was discovered in radare2 6.0.5 and earlier within the info() function of bin_ne.c. A crafted binary input can trigger a segmentation fault, leading to a denial of service when the tool processes malformed data. |
| In the Linux kernel, the following vulnerability has been resolved:
block: reject bs > ps block devices when THP is disabled
If THP is disabled and when a block device with logical block size >
page size is present, the following null ptr deref panic happens during
boot:
[ [13.2 mK AOSAN: null-ptr-deref in range [0x0000000000000000-0x0000000000K0 0 0[07]
[ 13.017749] RIP: 0010:create_empty_buffers+0x3b/0x380
<snip>
[ 13.025448] Call Trace:
[ 13.025692] <TASK>
[ 13.025895] block_read_full_folio+0x610/0x780
[ 13.026379] ? __pfx_blkdev_get_block+0x10/0x10
[ 13.027008] ? __folio_batch_add_and_move+0x1fa/0x2b0
[ 13.027548] ? __pfx_blkdev_read_folio+0x10/0x10
[ 13.028080] filemap_read_folio+0x9b/0x200
[ 13.028526] ? __pfx_filemap_read_folio+0x10/0x10
[ 13.029030] ? __filemap_get_folio+0x43/0x620
[ 13.029497] do_read_cache_folio+0x155/0x3b0
[ 13.029962] ? __pfx_blkdev_read_folio+0x10/0x10
[ 13.030381] read_part_sector+0xb7/0x2a0
[ 13.030805] read_lba+0x174/0x2c0
<snip>
[ 13.045348] nvme_scan_ns+0x684/0x850 [nvme_core]
[ 13.045858] ? __pfx_nvme_scan_ns+0x10/0x10 [nvme_core]
[ 13.046414] ? _raw_spin_unlock+0x15/0x40
[ 13.046843] ? __switch_to+0x523/0x10a0
[ 13.047253] ? kvm_clock_get_cycles+0x14/0x30
[ 13.047742] ? __pfx_nvme_scan_ns_async+0x10/0x10 [nvme_core]
[ 13.048353] async_run_entry_fn+0x96/0x4f0
[ 13.048787] process_one_work+0x667/0x10a0
[ 13.049219] worker_thread+0x63c/0xf60
As large folio support depends on THP, only allow bs > ps block devices
if THP is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: fix runtime constant support for nommu kernels
the `__runtime_fixup_32` function does not handle the case where `val` is
zero correctly (as might occur when patching a nommu kernel and referring
to a physical address below the 4GiB boundary whose upper 32 bits are all
zero) because nothing in the existing logic prevents the code from taking
the `else` branch of both nop-checks and emitting two `nop` instructions.
This leaves random garbage in the register that is supposed to receive the
upper 32 bits of the pointer instead of zero that when combined with the
value for the lower 32 bits yields an invalid pointer and causes a kernel
panic when that pointer is eventually accessed.
The author clearly considered the fact that if the `lui` is converted into
a `nop` that the second instruction needs to be adjusted to become an `li`
instead of an `addi`, hence introducing the `addi_insn_mask` variable, but
didn't follow that logic through fully to the case where the `else` branch
executes. To fix it just adjust the logic to ensure that the second `else`
branch is not taken if the first instruction will be patched to a `nop`. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ad1816a: Fix potential NULL pointer deref in snd_card_ad1816a_pnp()
Use pr_warn() instead of dev_warn() when 'pdev' is NULL to avoid a
potential NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: rtsn: Fix a null pointer dereference in rtsn_probe()
Add check for the return value of rcar_gen4_ptp_alloc()
to prevent potential null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix invalid inode pointer dereferences during log replay
In a few places where we call read_one_inode(), if we get a NULL pointer
we end up jumping into an error path, or fallthrough in case of
__add_inode_ref(), where we then do something like this:
iput(&inode->vfs_inode);
which results in an invalid inode pointer that triggers an invalid memory
access, resulting in a crash.
Fix this by making sure we don't do such dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix two issues in iommu_copy_struct_from_user()
In the review for iommu_copy_struct_to_user() helper, Matt pointed out that
a NULL pointer should be rejected prior to dereferencing it:
https://lore.kernel.org/all/86881827-8E2D-461C-BDA3-FA8FD14C343C@nvidia.com
And Alok pointed out a typo at the same time:
https://lore.kernel.org/all/480536af-6830-43ce-a327-adbd13dc3f1d@oracle.com
Since both issues were copied from iommu_copy_struct_from_user(), fix them
first in the current header. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/ext: Prevent update_locked_rq() calls with NULL rq
Avoid invoking update_locked_rq() when the runqueue (rq) pointer is NULL
in the SCX_CALL_OP and SCX_CALL_OP_RET macros.
Previously, calling update_locked_rq(NULL) with preemption enabled could
trigger the following warning:
BUG: using __this_cpu_write() in preemptible [00000000]
This happens because __this_cpu_write() is unsafe to use in preemptible
context.
rq is NULL when an ops invoked from an unlocked context. In such cases, we
don't need to store any rq, since the value should already be NULL
(unlocked). Ensure that update_locked_rq() is only called when rq is
non-NULL, preventing calling __this_cpu_write() on preemptible context. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
alloc_tag_top_users() attempts to lock alloc_tag_cttype->mod_lock even
when the alloc_tag_cttype is not allocated because:
1) alloc tagging is disabled because mem profiling is disabled
(!alloc_tag_cttype)
2) alloc tagging is enabled, but not yet initialized (!alloc_tag_cttype)
3) alloc tagging is enabled, but failed initialization
(!alloc_tag_cttype or IS_ERR(alloc_tag_cttype))
In all cases, alloc_tag_cttype is not allocated, and therefore
alloc_tag_top_users() should not attempt to acquire the semaphore.
This leads to a crash on memory allocation failure by attempting to
acquire a non-existent semaphore:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000001b: 0000 [#3] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000000d8-0x00000000000000df]
CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G D 6.16.0-rc2 #1 VOLUNTARY
Tainted: [D]=DIE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:down_read_trylock+0xaa/0x3b0
Code: d0 7c 08 84 d2 0f 85 a0 02 00 00 8b 0d df 31 dd 04 85 c9 75 29 48 b8 00 00 00 00 00 fc ff df 48 8d 6b 68 48 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 88 02 00 00 48 3b 5b 68 0f 85 53 01 00 00 65 ff
RSP: 0000:ffff8881002ce9b8 EFLAGS: 00010016
RAX: dffffc0000000000 RBX: 0000000000000070 RCX: 0000000000000000
RDX: 000000000000001b RSI: 000000000000000a RDI: 0000000000000070
RBP: 00000000000000d8 R08: 0000000000000001 R09: ffffed107dde49d1
R10: ffff8883eef24e8b R11: ffff8881002cec20 R12: 1ffff11020059d37
R13: 00000000003fff7b R14: ffff8881002cec20 R15: dffffc0000000000
FS: 00007f963f21d940(0000) GS:ffff888458ca6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f963f5edf71 CR3: 000000010672c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
codetag_trylock_module_list+0xd/0x20
alloc_tag_top_users+0x369/0x4b0
__show_mem+0x1cd/0x6e0
warn_alloc+0x2b1/0x390
__alloc_frozen_pages_noprof+0x12b9/0x21a0
alloc_pages_mpol+0x135/0x3e0
alloc_slab_page+0x82/0xe0
new_slab+0x212/0x240
___slab_alloc+0x82a/0xe00
</TASK>
As David Wang points out, this issue became easier to trigger after commit
780138b12381 ("alloc_tag: check mem_profiling_support in alloc_tag_init").
Before the commit, the issue occurred only when it failed to allocate and
initialize alloc_tag_cttype or if a memory allocation fails before
alloc_tag_init() is called. After the commit, it can be easily triggered
when memory profiling is compiled but disabled at boot.
To properly determine whether alloc_tag_init() has been called and its
data structures initialized, verify that alloc_tag_cttype is a valid
pointer before acquiring the semaphore. If the variable is NULL or an
error value, it has not been properly initialized. In such a case, just
skip and do not attempt to acquire the semaphore.
[harry.yoo@oracle.com: v3] |
