| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
Commit c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic")
introduced an array mrioc->evtack_cmds but initialization of the array
elements was missed. They are just zero cleared. The function
mpi3mr_complete_evt_ack() refers host_tag field of the elements. Due to the
zero value of the host_tag field, the function calls clear_bit() for
mrico->evtack_cmds_bitmap with wrong bit index. This results in memory
access to invalid address and "BUG: KASAN: use-after-free". This BUG was
observed at eHBA-9600 firmware update to version 8.3.1.0. To fix it, add
the missing initialization of mrioc->evtack_cmds. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
hci_remove_adv_monitor() ->
msft_remove_monitor() ->
msft_remove_monitor_sync() ->
msft_le_cancel_monitor_advertisement_cb() ->
hci_free_adv_monitor()
Let's fix the problem by just stashing the relevant data when it's
still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: flower: fix filter idr initialization
The cited commit moved idr initialization too early in fl_change() which
allows concurrent users to access the filter that is still being
initialized and is in inconsistent state, which, in turn, can cause NULL
pointer dereference [0]. Since there is no obvious way to fix the ordering
without reverting the whole cited commit, alternative approach taken to
first insert NULL pointer into idr in order to allocate the handle but
still cause fl_get() to return NULL and prevent concurrent users from
seeing the filter while providing miss-to-action infrastructure with valid
handle id early in fl_change().
[ 152.434728] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN
[ 152.436163] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 152.437269] CPU: 4 PID: 3877 Comm: tc Not tainted 6.3.0-rc4+ #5
[ 152.438110] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 152.439644] RIP: 0010:fl_dump_key+0x8b/0x1d10 [cls_flower]
[ 152.440461] Code: 01 f2 02 f2 c7 40 08 04 f2 04 f2 c7 40 0c 04 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 84 24 00 01 00 00 48 89 c8 48 c1 e8 03 <0f> b6 04 10 84 c0 74 08 3c 03 0f 8e 98 19 00 00 8b 13 85 d2 74 57
[ 152.442885] RSP: 0018:ffff88817a28f158 EFLAGS: 00010246
[ 152.443851] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 152.444826] RDX: dffffc0000000000 RSI: ffffffff8500ae80 RDI: ffff88810a987900
[ 152.445791] RBP: ffff888179d88240 R08: ffff888179d8845c R09: ffff888179d88240
[ 152.446780] R10: ffffed102f451e48 R11: 00000000fffffff2 R12: ffff88810a987900
[ 152.447741] R13: ffffffff8500ae80 R14: ffff88810a987900 R15: ffff888149b3c738
[ 152.448756] FS: 00007f5eb2a34800(0000) GS:ffff88881ec00000(0000) knlGS:0000000000000000
[ 152.449888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 152.450685] CR2: 000000000046ad19 CR3: 000000010b0bd006 CR4: 0000000000370ea0
[ 152.451641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 152.452628] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 152.453588] Call Trace:
[ 152.454032] <TASK>
[ 152.454447] ? netlink_sendmsg+0x7a1/0xcb0
[ 152.455109] ? sock_sendmsg+0xc5/0x190
[ 152.455689] ? ____sys_sendmsg+0x535/0x6b0
[ 152.456320] ? ___sys_sendmsg+0xeb/0x170
[ 152.456916] ? do_syscall_64+0x3d/0x90
[ 152.457529] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.458321] ? ___sys_sendmsg+0xeb/0x170
[ 152.458958] ? __sys_sendmsg+0xb5/0x140
[ 152.459564] ? do_syscall_64+0x3d/0x90
[ 152.460122] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.460852] ? fl_dump_key_options.part.0+0xea0/0xea0 [cls_flower]
[ 152.461710] ? _raw_spin_lock+0x7a/0xd0
[ 152.462299] ? _raw_read_lock_irq+0x30/0x30
[ 152.462924] ? nla_put+0x15e/0x1c0
[ 152.463480] fl_dump+0x228/0x650 [cls_flower]
[ 152.464112] ? fl_tmplt_dump+0x210/0x210 [cls_flower]
[ 152.464854] ? __kmem_cache_alloc_node+0x1a7/0x330
[ 152.465592] ? nla_put+0x15e/0x1c0
[ 152.466160] tcf_fill_node+0x515/0x9a0
[ 152.466766] ? tc_setup_offload_action+0xf0/0xf0
[ 152.467463] ? __alloc_skb+0x13c/0x2a0
[ 152.468067] ? __build_skb_around+0x330/0x330
[ 152.468814] ? fl_get+0x107/0x1a0 [cls_flower]
[ 152.469503] tc_del_tfilter+0x718/0x1330
[ 152.470115] ? is_bpf_text_address+0xa/0x20
[ 152.470765] ? tc_ctl_chain+0xee0/0xee0
[ 152.471335] ? __kernel_text_address+0xe/0x30
[ 152.471948] ? unwind_get_return_address+0x56/0xa0
[ 152.472639] ? __thaw_task+0x150/0x150
[ 152.473218] ? arch_stack_walk+0x98/0xf0
[ 152.473839] ? __stack_depot_save+0x35/0x4c0
[ 152.474501] ? stack_trace_save+0x91/0xc0
[ 152.475119] ? security_capable+0x51/0x90
[ 152.475741] rtnetlink_rcv_msg+0x2c1/0x9d0
[ 152.476387] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 152.477042]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
Userspace can guess the id value and try to race oa_config object creation
with config remove, resulting in a use-after-free if we dereference the
object after unlocking the metrics_lock. For that reason, unlocking the
metrics_lock must be done after we are done dereferencing the object.
[tursulin: Manually added stable tag.]
(cherry picked from commit 49f6f6483b652108bcb73accd0204a464b922395) |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix a potential data corruption
We must ensure that the subrequests are joined back into the head before
we can retransmit a request. If the head was not on the commit lists,
because the server wrote it synchronously, we still need to add it back
to the retransmission list.
Add a call that mirrors the effect of nfs_cancel_remove_inode() for
O_DIRECT. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not swap cpu_buffer during resize process
When ring_buffer_swap_cpu was called during resize process,
the cpu buffer was swapped in the middle, resulting in incorrect state.
Continuing to run in the wrong state will result in oops.
This issue can be easily reproduced using the following two scripts:
/tmp # cat test1.sh
//#! /bin/sh
for i in `seq 0 100000`
do
echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb
sleep 0.5
echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb
sleep 0.5
done
/tmp # cat test2.sh
//#! /bin/sh
for i in `seq 0 100000`
do
echo irqsoff > /sys/kernel/debug/tracing/current_tracer
sleep 1
echo nop > /sys/kernel/debug/tracing/current_tracer
sleep 1
done
/tmp # ./test1.sh &
/tmp # ./test2.sh &
A typical oops log is as follows, sometimes with other different oops logs.
[ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8
[ 231.713375] Modules linked in:
[ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15
[ 231.716750] Hardware name: linux,dummy-virt (DT)
[ 231.718152] Workqueue: events update_pages_handler
[ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 231.721171] pc : rb_update_pages+0x378/0x3f8
[ 231.722212] lr : rb_update_pages+0x25c/0x3f8
[ 231.723248] sp : ffff800082b9bd50
[ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000
[ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0
[ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a
[ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000
[ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510
[ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002
[ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558
[ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001
[ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000
[ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208
[ 231.744196] Call trace:
[ 231.744892] rb_update_pages+0x378/0x3f8
[ 231.745893] update_pages_handler+0x1c/0x38
[ 231.746893] process_one_work+0x1f0/0x468
[ 231.747852] worker_thread+0x54/0x410
[ 231.748737] kthread+0x124/0x138
[ 231.749549] ret_from_fork+0x10/0x20
[ 231.750434] ---[ end trace 0000000000000000 ]---
[ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 233.721696] Mem abort info:
[ 233.721935] ESR = 0x0000000096000004
[ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits
[ 233.722596] SET = 0, FnV = 0
[ 233.722805] EA = 0, S1PTW = 0
[ 233.723026] FSC = 0x04: level 0 translation fault
[ 233.723458] Data abort info:
[ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000
[ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 233.726720] Modules linked in:
[ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15
[ 233.727777] Hardware name: linux,dummy-virt (DT)
[ 233.728225] Workqueue: events update_pages_handler
[ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 233.729054] pc : rb_update_pages+0x1a8/0x3f8
[ 233.729334] lr : rb_update_pages+0x154/0x3f8
[ 233.729592] sp : ffff800082b9bd50
[ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 00000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix invalid buffer access for legacy rq
The below crash can be encountered when using xdpsock in rx mode for
legacy rq: the buffer gets released in the XDP_REDIRECT path, and then
once again in the driver. This fix sets the flag to avoid releasing on
the driver side.
XSK handling of buffers for legacy rq was relying on the caller to set
the skip release flag. But the referenced fix started using fragment
counts for pages instead of the skip flag.
Crash log:
general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP
CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28
Code: ...
RSP: 0018:ffff88810082fc98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc
RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901
RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006
R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000
R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00
FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x32/0x80
? exc_general_protection+0x192/0x390
? asm_exc_general_protection+0x22/0x30
? 0xffffffffa000b514
? bpf_prog_03b13f331978c78c+0xf/0x28
mlx5e_xdp_handle+0x48/0x670 [mlx5_core]
? dev_gro_receive+0x3b5/0x6e0
mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core]
mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core]
mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core]
mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core]
__napi_poll+0x25/0x1a0
net_rx_action+0x28a/0x300
__do_softirq+0xcd/0x279
? sort_range+0x20/0x20
run_ksoftirqd+0x1a/0x20
smpboot_thread_fn+0xa2/0x130
kthread+0xc9/0xf0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix NULL deref in tipc_named_node_up() on empty publication list
User-space applications can bind a large number of service addresses to
one or more sockets. Each binding of a local-scope service address inserts
one entry (publication) into the TIPC name table. If the number of these
publications exceeds TIPC_MAX_PUBL (65535), protocol service types
(such as node state and link state) are no longer inserted into the name
table. This causes two issues:
1. User-space applications subscribing to node or link up/down events
stop receiving notifications.
2. A NULL pointer dereference can occur:
BUG: kernel NULL pointer dereference, address: 00000000000000d0
...
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full)
...
RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221)
...
Call Trace:
<IRQ>
tipc_node_write_unlock (net/tipc/node.c:428)
tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189)
tipc_udp_recv (net/tipc/udp_media.c:389)
Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute)
-----------------------------|-----------------------------
| ...
| list_for_each_entry(publ, pls, binding_node) {
| ...
| __skb_queue_tail(list, skb);
| ...
| }
| ...
| hdr = buf_msg(skb_peek_tail(list));
... |
tipc_nametbl_publish(); |
If 'tipc_nametbl_publish()' (Thread 1) fails because the number of
local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a
result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference.
Fix these issues by allowing protocol service types (node state, link state,
and topology server) to be inserted into the name table unconditionally.
This ensures that users subscribing to these types always receive
notifications. In addition, the maximum number of local user publications is
reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size
calculated in tipc_link_set_queue_limits() remains valid. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Dont send random pad bytes in RESET/ACTIVATE messages
The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer.
Replace the strcpy(data, l->if_name) with memcpy() so that the
pad bytes are actually written (l->if_name[] is zero padded)
rather than sending random bytes from the skb to the remote system.
Replace two other strcpy() with strscpy(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: rate limit unmapped SID errors
A client can include many structurally valid but unmapped SIDs in a DACL.
Logging every mapping failure lets one request generate hundreds of kernel
error messages.
Rate limit the message to prevent an authenticated client from flooding
the kernel log. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix listener task lifetime on netdev events
The listener thread exits when its listening socket is shutdown. The
netdevice notifier shuts down the socket before calling kthread_stop(), so
the task_struct can be freed before kthread_stop() gets its reference.
Create the listener in a stopped state and hold an extra task_struct
reference until kthread_stop_put() completes. Also stop and release
listeners before freeing their interface records during TCP teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: validate version TLV value lengths
btintel_parse_version_tlv() verifies that a complete TLV is present in
the response, but it does not ensure that the value is long enough for
the specific TLV type. A short value can therefore cause an
out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(),
or memcpy().
Reject values shorter than the minimum required by each known TLV type.
Also reject responses that do not contain the Command Complete Status
field. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: bound firmware ID by TLV length
The firmware ID is treated as a NUL-terminated string even though the
TLV length is its only boundary. If the value does not contain a NUL
terminator, snprintf() can read beyond the received response.
Limit the conversion to the advertised TLV value length. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role. |
| In the Linux kernel, the following vulnerability has been resolved:
memfd: deny writeable mappings when implying SEAL_WRITE
When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the
implied seal is set after the check that makes sure the memfd can not have
any writable mappings. This means one can use SEAL_EXEC to apply
SEAL_WRITE while having writeable mappings.
This breaks the contract that SEAL_WRITE provides and can be used by an
attacker to pass a memfd that appears to be write sealed but can still be
modified arbitrarily.
Fix this by adding the implied seals before the call for
mapping_deny_writable() is done. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix UAF in iso_recv_frame
iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock
before using sk, with no reference held. A concurrent iso_sock_kill()
can free sk in that window, causing use-after-free on sk->sk_state and
sock_queue_rcv_skb().
Fix by replacing the bare pointer read with iso_sock_hold(conn), which
calls sock_hold() while the spinlock is held, atomically elevating the
refcount before the lock drops. Add a drop_put label so sock_put() is
called on all exit paths where the hold succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssm-prueth: Move setting of netops to fix crash
icssm_prueth_netdev_init() calls of_phy_get_and_connect() before
ndev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: skip eviction of a BO with no resource
xe_evict_flags() switches on tbo->resource->mem_type to choose an
eviction placement. An xe BO can reach eviction with no ttm.resource,
e.g. an imported dma-buf BO whose resource was freed during teardown
while its attachment is still live: the exporter then invalidates it via
xe_dma_buf_move_notify() -> xe_bo_evict(), and the switch dereferences a
NULL resource and faults.
A BO with no resource has nothing placed or mapped, so there is nothing
to evict. Return an empty placement (num_placement = 0), mirroring the
handling already used for non-xe scatter-gather BOs just above;
ttm_bo_validate() then takes the pipeline-gutting path and returns 0.
Without the fix the xe_dma_buf@xe_test_dmabuf_move_notify_no_resource
dynamic live selftest will fail with below stack.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:xe_evict_flags+0xf4/0x140 [xe]
Call Trace:
<TASK>
xe_bo_evict+0x40/0xa0 [xe]
? ttm_bo_pipeline_gutting+0x71/0x180 [ttm]
xe_test_dmabuf_move_notify_no_resource+0x182/0x440 [xe]
xe_dma_buf_kunit+0x387/0x580 [xe]
v2: Add Fixes tag and failure info in commit text (Matt Brost)
(cherry picked from commit dbcfaac6331f1fcb0c2fe3ad3e9adb1e5d43ec0c) |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: prevent unregistering a power supply while a callback runs
Once a power supply is registered, its callbacks can immediately start
firing from other contexts, such as external_power_changed() triggered by
the TCPM stack. If a power supply is unregistered while the callback is
still running, the driver data can already be freed when the callback
tries to access it, leading to a use-after-free.
This happens e.g. when the hardware bus carrying the power supply device
malfunctions (e.g. I2C is hogged down by another malfunctioning device)
immediately after the power supply is registered, and thus the core is
still processing the callbacks which were queued up when the driver
starts the removal, leading in some cases to a kernel crash, e.g.:
[ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005
[ 11.646751] Mem abort info:
[ 11.647006] ESR = 0x0000000096000004
[ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits
[ 11.647806] SET = 0, FnV = 0
[ 11.648077] EA = 0, S1PTW = 0
[ 11.648356] FSC = 0x04: level 0 translation fault
[ 11.648785] Data abort info:
[ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0
[ 11.650390] [0000000000000005] user address but active_mm is swapper
[ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP
[ 11.651460] Modules linked in:
[ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT
[ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT)
[ 11.653024] Workqueue: events power_supply_changed_work
[ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100
[ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8
[ 11.655098] sp : ffff80008192bb30
[ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000
[ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28
[ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62
[ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000
[ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000
[ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590
[ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0
[ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000
[ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000
[ 11.661878] Call trace:
[ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P)
[ 11.662596] __power_supply_am_i_supplied+0x40/0xb8
[ 11.663040] psy_for_each_psy_cb+0x20/0x40
[ 11.663416] class_for_each_device+0x110/0x150
[ 11.663825] power_supply_am_i_supplied+0x68/0x100
[ 11.664262] bq257xx_external_power_changed+0x58/0x140
[ 11.664733] __power_supply_changed_work+0x60/0x80
[ 11.665170] psy_for_each_psy_cb+0x20/0x40
[ 11.665545] class_for_each_device+0x110/0x150
[ 11.665953] power_supply_changed_work+0x98/0x1b8
[ 11.666382] process_one_work+0x164/0x4c0
[ 11.666758] worker_thread+0x19c/0x320
[ 11.667104] kthread+0x138/0x150
[ 11.667408] ret_from_fork+0x10/0x20
[ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34)
[ 11.668294] ---[ end trace 0000000000000000 ]---
Add a read-write semaphore between external_power_changed() and
power_supply_unregister() to prevent the latter from returning (and thus
the driver from freeing its data) while the callback is still running. |
