Export limit exceeded: 51462 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (8766 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-71114 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: via_wdt: fix critical boot hang due to unnamed resource allocation The VIA watchdog driver uses allocate_resource() to reserve a MMIO region for the watchdog control register. However, the allocated resource was not given a name, which causes the kernel resource tree to contain an entry marked as "<BAD>" under /proc/iomem on x86 platforms. During boot, this unnamed resource can lead to a critical hang because subsequent resource lookups and conflict checks fail to handle the invalid entry properly. | ||||
| CVE-2025-71104 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timer When advancing the target expiration for the guest's APIC timer in periodic mode, set the expiration to "now" if the target expiration is in the past (similar to what is done in update_target_expiration()). Blindly adding the period to the previous target expiration can result in KVM generating a practically unbounded number of hrtimer IRQs due to programming an expired timer over and over. In extreme scenarios, e.g. if userspace pauses/suspends a VM for an extended duration, this can even cause hard lockups in the host. Currently, the bug only affects Intel CPUs when using the hypervisor timer (HV timer), a.k.a. the VMX preemption timer. Unlike the software timer, a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the HV timer only runs while the guest is active. As a result, if the vCPU does not run for an extended duration, there will be a huge gap between the target expiration and the current time the vCPU resumes running. Because the target expiration is incremented by only one period on each timer expiration, this leads to a series of timer expirations occurring rapidly after the vCPU/VM resumes. More critically, when the vCPU first triggers a periodic HV timer expiration after resuming, advancing the expiration by only one period will result in a target expiration in the past. As a result, the delta may be calculated as a negative value. When the delta is converted into an absolute value (tscdeadline is an unsigned u64), the resulting value can overflow what the HV timer is capable of programming. I.e. the large value will exceed the VMX Preemption Timer's maximum bit width of cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the HV timer to the software timer (hrtimers). After switching to the software timer, periodic timer expiration callbacks may be executed consecutively within a single clock interrupt handler, because hrtimers honors KVM's request for an expiration in the past and immediately re-invokes KVM's callback after reprogramming. And because the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer over and over until the target expiration is advanced to "now" can result in a hard lockup. E.g. the following hard lockup was triggered in the host when running a Windows VM (only relevant because it used the APIC timer in periodic mode) after resuming the VM from a long suspend (in the host). NMI watchdog: Watchdog detected hard LOCKUP on cpu 45 ... RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm] ... RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046 RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500 RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0 R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0 R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8 FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0 PKRU: 55555554 Call Trace: <IRQ> apic_timer_fn+0x31/0x50 [kvm] __hrtimer_run_queues+0x100/0x280 hrtimer_interrupt+0x100/0x210 ? ttwu_do_wakeup+0x19/0x160 smp_apic_timer_interrupt+0x6a/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> Moreover, if the suspend duration of the virtual machine is not long enough to trigger a hard lockup in this scenario, since commit 98c25ead5eda ("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM will continue using the software timer until the guest reprograms the APIC timer in some way. Since the periodic timer does not require frequent APIC timer register programming, the guest may continue to use the software timer in ---truncated--- | ||||
| CVE-2025-71097 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix reference count leak when using error routes with nexthop objects When a nexthop object is deleted, it is marked as dead and then fib_table_flush() is called to flush all the routes that are using the dead nexthop. The current logic in fib_table_flush() is to only flush error routes (e.g., blackhole) when it is called as part of network namespace dismantle (i.e., with flush_all=true). Therefore, error routes are not flushed when their nexthop object is deleted: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip route add 198.51.100.1/32 nhid 1 # ip route add blackhole 198.51.100.2/32 nhid 1 # ip nexthop del id 1 # ip route show blackhole 198.51.100.2 nhid 1 dev dummy1 As such, they keep holding a reference on the nexthop object which in turn holds a reference on the nexthop device, resulting in a reference count leak: # ip link del dev dummy1 [ 70.516258] unregister_netdevice: waiting for dummy1 to become free. Usage count = 2 Fix by flushing error routes when their nexthop is marked as dead. IPv6 does not suffer from this problem. | ||||
| CVE-2025-71084 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cm: Fix leaking the multicast GID table reference If the CM ID is destroyed while the CM event for multicast creating is still queued the cancel_work_sync() will prevent the work from running which also prevents destroying the ah_attr. This leaks a refcount and triggers a WARN: GID entry ref leak for dev syz1 index 2 ref=573 WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 release_gid_table drivers/infiniband/core/cache.c:806 [inline] WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 gid_table_release_one+0x284/0x3cc drivers/infiniband/core/cache.c:886 Destroy the ah_attr after canceling the work, it is safe to call this twice. | ||||
| CVE-2026-112083 | 1 Sgl-project | 1 Sglang | 2026-10-19 | 5.3 Medium |
| A security flaw has been discovered in sgl-project SGLang up to 0.5.19. Affected is the function WeightExporter.send_weights_to_remote_instance of the file python/sglang/srt/model_executor/model_runner_components/weight_exporter.py of the component Weight Exporter. Performing a manipulation of the argument group_name results in denial of service. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-112082 | 1 Sgl-project | 1 Sglang | 2026-10-19 | 7.5 High |
| A vulnerability was identified in sgl-project SGLang up to 0.5.19. This impacts the function Scheduler.expert_distribution_handle of the file python/sglang/srt/eplb/expert_distribution.py of the component Expert-Distribution Recording Endpoint. Such manipulation leads to denial of service. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-112157 | 1 Memtensor | 1 Memmy-agent | 2026-10-19 | 3.1 Low |
| A weakness has been identified in MemTensor memmy-agent up to 1.0.9/1.1.1/1.2.2. The impacted element is the function requireAdminWrite of the file Memory/src/server/http.ts of the component Memory Service. This manipulation causes resource consumption. Remote exploitation of the attack is possible. The attack is considered to have high complexity. The exploitability is regarded as difficult. The exploit has been made available to the public and could be used for attacks. The exploit is partially overstated. While "POST /api/v1/admin/shutdown" accepts unauthenticated requests when no token is configured, it’s designed for local use and later received cross-origin fixes. Unauthenticated endpoint exposure is confirmed; browser-triggered DoS remains likely but depends on specific browser behavior. | ||||
| CVE-2026-90050 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-101021 | 1 J4care | 1 Dcm4chee-arc-light | 2026-10-19 | 7.5 High |
| MultipartInputStream performs inefficient boundary matching and unnecessary buffer copying. Crafted multipart input can force excessive boundary comparisons and repeated copying. | ||||
| CVE-2026-98630 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Fix payload page pool error cleanup The payload page pool pointer contains an error pointer when its allocation fails. The cleanup path passes that error pointer to page_pool_destroy() instead of destroying the header page pool. This can dereference the error pointer and leave the header page pool allocated. Destroy the header page pool instead. | ||||
| CVE-2026-98608 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leak in virtio_gpu_resource_create_ioctl() virtio_gpu_resource_create_ioctl() calls drm_gem_object_release() on the drm_gem_handle_create() error path instead of dropping the reference it owns, so obj->funcs->free() never runs and the virtio_gpu_object, its pages and sg table, the resource id and the host-side resource are leaked. Use drm_gem_object_put() instead. | ||||
| CVE-2026-98598 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Prevent rt6_insert_exception() for dying fib6_info. Before the cited commit, fib6_nh_flush_exceptions() always set from->exception_bucket_flushed = 1 under rt6_exception_lock to prevent rt6_insert_exception() from inserting a new exception for a dying fib6_info. The flag was replaced with the FIB6_EXCEPTION_BUCKET_FLUSHED bit stored in nh->rt6i_exception_bucket. The problem is that now the bit is only set when the bucket is not NULL and fib6_nh_flush_exceptions() is called from fib6_nh_release() after fib6_ref has already reached zero. If rt6_insert_exception() is called while the target fib6_info is being removed via fib6_purge_rt(), a new exception could be created successfully because rt6_flush_exceptions() no longer sets the bit. This creates a reference cycle between the fib6_info and the exception route, leaking the fib6_info, its nexthop device, and all per-CPU routes in fib6_nh->rt6i_pcpu, which stalls netdev unregistration. [ 34.680602] unregister_netdevice: waiting for gre6 to become free. Usage count = 68 [ 44.920675] unregister_netdevice: waiting for gre6 to become free. Usage count = 68 [ 55.176582] unregister_netdevice: waiting for gre6 to become free. Usage count = 68 Let's call fib6_drop_pcpu_from() before rt6_flush_exceptions(), to set fib6_destroying before rt6_exception_lock, and check f6i->fib6_destroying in rt6_insert_exception(). Note that FIB6_EXCEPTION_BUCKET_FLUSHED logic is dead and we can clean it up in net-next. | ||||
| CVE-2026-98558 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: flush skb_defer_nodes in dev_cpu_dead() When a CPU goes offline, dev_cpu_dead() drains its softnet queues (completion_queue, output_queue, poll_list, process_queue, and input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched. If oldcpu goes offline while holding pending skbs in its skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI threshold, or if the IPI races with CPU teardown), those skbs remain stranded until oldcpu is brought back online. If any of these skbs hold page_pool fragments, page_pool_destroy() will stall indefinitely waiting for inflight pages to be returned when a netdev or driver is torn down while oldcpu is offline. Additionally, if smp_call_function_single_async() fails in kick_defer_list_purge() because the target CPU went offline, reset defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the CPU comes back online. Also, if oldcpu was the last online CPU on its NUMA node, drain that node's slot across all CPUs so no skbs deferred from that node remain stranded on idle remote CPUs (or if the node itself is subsequently offlined). Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and whether the caller migrated CPUs after llist_add(), flushing the node list if so, to close the preemption TOCTOU race against CPU/node teardown. | ||||
| CVE-2026-97811 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-18 | 7.8 High |
| Double free in OpenSSH for Windows allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-60021 | 1 Gitea | 1 Gitea | 2026-10-18 | 6.5 Medium |
| Gitea's initial GitLab migration version probe uses an HTTP client without a timeout and does not attach the migration task's cancellation context. An authenticated user who can start migrations can target an attacker-controlled server that keeps the response open indefinitely. The request continues after task cancellation and can exhaust the migration worker pool, preventing other migrations from progressing. | ||||
| CVE-2026-107381 | 1 Darylldoyle | 1 Svg-sanitizer | 2026-10-18 | 6.5 Medium |
| svg-sanitizer is a PHP SVG/XML sanitizer. Prior to 1.0.0, Resolver::processReferences() in src/ElementReference/Resolver.php builds the SVG <use> reference graph with a case-sensitive href attribute predicate before cleanHrefAttributes() normalizes mixed-case names. An attacker can provide xlink:HrEf on nested <use> elements so the graph omits those references, after which the sanitizer converts the attribute to canonical xlink:href and returns the live nesting structure without applying the useNestingLimit protection. A consuming application that renders the sanitized SVG can therefore be exposed to the resource exhaustion that control is designed to prevent. This issue is fixed in version 1.0.0. | ||||
| CVE-2026-109261 | 1 Imagemagick | 1 Imagemagick | 2026-10-18 | 3.7 Low |
| ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a memory leak in the GIF encoder because allocated memory is not released when color quantization fails during encoding. Attackers can supply images whose GIF conversion causes quantization to fail, leaking memory with each attempt and degrading availability. | ||||
| CVE-2026-111985 | 1 Automatic1111 | 1 Stable-diffusion-webui | 2026-10-18 | 4.3 Medium |
| A vulnerability was found in AUTOMATIC1111 stable-diffusion-webui up to 1.10.1. This impacts the function read_metadata_from_safetensors of the file modules/sd_models.py of the component Metadata Extraction. The manipulation of the argument header length field results in allocation of resources. It is possible to launch the attack remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-70155 | 1 Microsoft | 14 Windows 10 1607, Windows 10 1809, Windows Server 2012 and 11 more | 2026-10-18 | 7.5 High |
| Missing release of memory after effective lifetime in Windows DNS allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-60018 | 1 Gitea | 1 Gitea | 2026-10-17 | 6.5 Medium |
| Gitea's OneDev migration downloader reads the entire remote version response into memory without a size limit and uses a client without a timeout. An authenticated user who can start a repository migration can direct it to an attacker-controlled OneDev-compatible server returning an oversized or never-ending response. This can consume memory and hold migration workers, impairing service availability. | ||||