| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: tcp: fix double sock release on batch realloc
bpf_iter_tcp_batch() releases the current batch via
bpf_iter_tcp_put_batch(), which drops the socket refs and rewrites
each slot with the socket cookie, then grows the batch. cur_sk/end_sk
are kept for bpf_iter_tcp_resume(), but on realloc failure the function
returns ERR_PTR() before resume runs, leaving cur_sk < end_sk over
slots that now hold cookies rather than sock pointers.
bpf_iter_tcp_seq_stop() then calls bpf_iter_tcp_put_batch() again and
dereferences a cookie as a struct sock.
Empty the batch on the failure path so stop() does not release it
again. The sockets were already freed by the first
bpf_iter_tcp_put_batch(), so nothing leaks, and a later read() rescans
the bucket from the start instead of skipping it. The sibling
GFP_NOWAIT failure path still holds real socket references and is left
for stop() to release.
BUG: KASAN: null-ptr-deref in __sock_gen_cookie
Read of size 8 at addr 0000000000000059 by task exploit
...
__sock_gen_cookie (net/core/sock_diag.c:28)
bpf_iter_tcp_put_batch (net/ipv4/tcp_ipv4.c:2918)
bpf_iter_tcp_seq_stop (net/ipv4/tcp_ipv4.c:3270)
bpf_seq_read (kernel/bpf/bpf_iter.c:205)
vfs_read (fs/read_write.c:572)
ksys_read (fs/read_write.c:716)
do_syscall_64
entry_SYSCALL_64_after_hwframe
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: tear down new links on vif update error path
When ieee80211_vif_update_links() adds new links it allocates a link
container for each and calls ieee80211_link_init() (which registers the
per-link debugfs files with file->private_data pointing into the container)
and ieee80211_link_setup(). If the subsequent drv_change_vif_links() fails,
the error path restores the old pointers and jumps to 'free', which frees
the new containers but never removes their debugfs entries or stops the
links. The debugfs files survive with file->private_data dangling at the
freed container, so a later open()+read() (e.g. link-1/txpower)
dereferences freed memory in ieee80211_if_read_link(), a use-after-free.
The removal path already dismantles links correctly via
ieee80211_tear_down_links(), which removes each link's keys and debugfs
entries and calls ieee80211_link_stop(); the add path on the error branch
does not. Commit be1ba9ed221f ("wifi: mac80211: avoid weird state in error
path") hardened this same error path for the link-removal case
(new_links == 0) but left the newly-added links' teardown unaddressed.
drv_change_vif_links() can fail at runtime on MLO drivers (internal
allocation / queue / firmware command failures).
Remove the new links' debugfs entries and stop them before freeing.
BUG: KASAN: slab-use-after-free in ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127)
Read of size 8 at addr ffff888011290000 by task exploit/145
Call Trace:
...
ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127)
short_proxy_read (fs/debugfs/file.c:373)
vfs_read (fs/read_write.c:572)
ksys_read (fs/read_write.c:716)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
...
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a
RIP: 0010:ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: don't free the ASCONF's own transport in DEL-IP processing
sctp_process_asconf() caches the transport the ASCONF chunk is processed
against in asconf->transport (== chunk->transport, set once in sctp_rcv()).
For an ASCONF located through its Address Parameter by
__sctp_rcv_asconf_lookup(), that cached transport corresponds to the
Address Parameter, which need not be the packet's source address.
sctp_process_asconf_param() rejects a DEL-IP for the packet source address
(ADDIP D8, SCTP_ERROR_DEL_SRC_IP), but nothing protects asconf->transport.
A single ASCONF can therefore carry, in order:
[Address Parameter L] [DEL-IP L] [DEL-IP 0.0.0.0]
where L differs from the source. The DEL-IP for L passes the D8 check and
calls sctp_assoc_rm_peer() on the transport that asconf->transport still
points at, freeing it (RCU-deferred). The following wildcard DEL-IP then
reuses the now-dangling asconf->transport in sctp_assoc_set_primary() and
sctp_assoc_del_nonprimary_peers(): set_primary() dereferences the freed
transport (->ipaddr, ->state) and plants the dangling pointer into
asoc->peer.primary_path / active_path, and del_nonprimary_peers(), keeping
only the pointer that is no longer on the list, removes every real
transport, leaving the association with a transport_count of 0 and
primary_path/active_path pointing at freed memory.
Reject a DEL-IP that targets the transport the ASCONF is being processed
against, mirroring the existing source-address guard, so the wildcard
branch can never reuse a freed transport. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Check for invalid/obsolete root *after* making MMU pages available
Check for a "stale" page fault, i.e. for an invalid and/or obsolete root,
after making MMU pages available for the shadow MMU. If reclaiming shadow
pages zaps an in-use root, i.e. marks it invalid, then KVM will attempt to
map memory into an invalid root. On its own, populating an invalid root is
"fine", but because child shadow pages inherit their parent's role, any
children created during the map/fetch will be created as invalid pages,
thus violating KVM's invariant that invalid pages are never on the list of
active MMU pages.
Note, the underlying flaw has existed since KVM first started tracking
invalid roots in 2008 (commit 2e53d63acba7, "KVM: MMU: ignore zapped root
pagetables"), but the true badness only came along in 2020 (Linux 5.9)
with the invariant that invalid shadow pages can't be on the list of
active pages.
Note #2, inheriting role.invalid when creating child shadow pages is also
far from ideal; that flaw will be addressed separately. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()
l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after
release_sock(parent). Once the parent lock is dropped the newly
enqueued child socket sk is reachable via the accept queue, so another
task can accept and free it before the callback dereferences sk,
resulting in a use-after-free.
Rework the ->new_connection() op so the core, rather than the callback,
owns the child channel's lifetime. The op now receives a pre-allocated
new_chan and returns an errno instead of allocating and returning a
channel. l2cap_new_connection() allocates the child channel and links
it into the conn list via __l2cap_chan_add() before invoking the
callback, so the conn-list reference keeps the channel alive once
release_sock(parent) exposes the socket to other tasks.
Channel configuration that was duplicated in l2cap_sock_init() and the
various new_connection callbacks is consolidated into
l2cap_chan_set_defaults(), which now inherits from the parent channel
when one is supplied. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix use-after-free of the discoverer in tipc_disc_rcv()
bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(),
but tipc_disc_rcv() still dereferences b->disc in RX softirq under
rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv).
L2 bearers are safe thanks to the synchronize_net() in
tipc_disable_l2_media(), but the UDP bearer defers that call to the
cleanup_bearer() workqueue, so the discoverer is freed with no grace
period:
BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149)
Read of size 8 at addr ffff88802348b728 by task poc_tipc/184
<IRQ>
tipc_disc_rcv (net/tipc/discover.c:149)
tipc_rcv (net/tipc/node.c:2126)
tipc_udp_recv (net/tipc/udp_media.c:391)
udp_rcv (net/ipv4/udp.c:2643)
ip_local_deliver_finish (net/ipv4/ip_input.c:241)
</IRQ>
Freed by task 181:
kfree (mm/slub.c:6565)
bearer_disable (net/tipc/bearer.c:418)
tipc_nl_bearer_disable (net/tipc/bearer.c:1001)
The bearer is freed with kfree_rcu(); free the discoverer the same way.
Add an rcu_head to struct tipc_discoverer and free it and its skb from an
RCU callback.
Because the RCU callback (tipc_disc_free_rcu) lives in module text, a
call_rcu() that is still pending when the tipc module is unloaded would
invoke a freed function. Add an rcu_barrier() to tipc_exit() after the
bearer subsystem has been torn down, so all pending discoverer callbacks
have run before the module text goes away.
Reachable from an unprivileged user namespace: the TIPCv2 genl family is
netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC
and CONFIG_TIPC_MEDIA_UDP. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle
tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the
defragmentation engine (e.g. act_ct on out-of-order fragments). When
that happens the skb is no longer owned by the caller and must not be
touched again.
tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the
switch and returned the skb to the caller as if classification had
passed. The only qdisc that wires up qevents today is RED, via three call sites
(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)
red_enqueue() was continuing to operate on an skb it no longer owns in this
case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF.
tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10
tc filter add block 10 ... action ct
(with ct defrag enabled and traffic that produces out-of-order
fragments, e.g. a fragmented UDP stream)
Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress
and egress fast paths do: treat it as stolen and return NULL without
touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be
dropped/freed here, as it is no longer owned by us. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix MLE defragmentation
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreover, if acpi_nfit_probe() returns 0 after installing a notify
handler for the NFIT device and without allocating the acpi_desc
object and setting the NFIT device's driver data pointer, the
acpi_desc object will be allocated by acpi_nfit_update_notify()
and acpi_nfit_init() will be called to initialize it. Regardless
of whether or not acpi_nfit_init() fails in that case, the
acpi_nfit_shutdown() devm action is not added for the NFIT device
and acpi_desc is never removed from the acpi_descs list. If the
acpi_desc object is freed subsequently on driver removal, any
subsequent ACPI MCE will lead to a use-after-free like in the
previous case.
To address the first issue mentioned above, make acpi_nfit_probe()
call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and
to address the other one, add a remove callback to the driver and
make it call acpi_nfit_shutdown(). Also, since it is now possible to
pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it
may not have been initialized, add checks against NULL for acpi_desc and
its nvdimm_bus field to that function and make acpi_nfit_unregister()
clear the latter after unregistering the NVDIMM bus. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: zero chainstack array
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not limit zeroing to orig_size when only red zoning is enabled
When init (zeroing) on allocation is requested, for kmalloc() we
generally have to zero the full object size even if a smaller size is
requested, in order to provide krealloc()'s __GFP_ZERO guarantees.
But if we track the requested size, krealloc() uses that information to
do the right thing, so we can zero only the requested size. With red
zoning also enabled, any extra size became part of the red zone, so it
must not be zeroed and thus we must zero only the requested size.
However the current check is imprecise, and will trigger also when only
SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking
the requested size). This means enabling red zoning alone can compromise
krealloc()'s __GFP_ZERO contract.
Fix this by using slub_debug_orig_size() instead, which is the exact
check for whether the requested size is tracked. We don't need to care
if red zoning is also enabled or not. Also update and expand the
comment accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: re-lock request before returning from fuse_ref_folio()
fuse_ref_folio() unlocks the request but does not re-lock it before
returning. fuse_chan_abort() can end the request and the async end
callback (eg fuse_writepage_free()) can free the args while the
subsequent copy chain logic after fuse_ref_folio() accesses them,
leading to use-after-free issues.
Fix this by locking the request in fuse_ref_folio() before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix unlocked writing to ICOSQ
During napi poll, when the affinity changes and there's still XSK work
to be done, we trigger an ICOSQ interrupt on the new CPU. However, this
triggering on the ICOSQ is done unprotected.
There are 2 such races:
A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is
running from a different CPU due to affinity change. This can happen
because IRQ triggering is done after napi_complete_done(). At this point
the NAPI can be scheduled on a different CPU. Like this:
CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI)
------------------------------- --------------------------------
napi_complete_done() clears SCHED
mlx5e_cq_arm(...)
napi_schedule_prep() sets SCHED
mlx5e_napi_poll()
mlx5e_xsk_alloc_rx_mpwqe()
mlx5e_icosq_sync_lock() // noop
memcpy 640 B UMR body
advance sq->pc by 10
mlx5e_trigger_irq(&c->icosq)
wqe_info[pi] = {NOP, 1}
mlx5e_post_nop() advances sq->pc
B) mlx5e_trigger_irq() is called on the ICOSQ when
mlx5e_trigger_napi_icosq() is running.
The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized
locking scheme that doesn't work for this scenario. Kick the async ICOSQ
instead which is always locked.
This issue was noticed in the wild with the following splat:
netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd
WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...]
[...]
Call Trace:
<IRQ>
mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core]
__napi_poll+0x30/0x200
? skb_defer_free_flush+0x9c/0xc0
net_rx_action+0x2fe/0x3f0
handle_softirqs+0xd8/0x340
__irq_exit_rcu+0xbc/0xe0
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x26/0x40
[...]
---[ end trace 0000000000000000 ]---
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4,
opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2
WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64
00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02
00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02
00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02
00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4,
opcode 0xd, syndrome 0x5, vendor syndrome 0xf9
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential for tearing in ->remote_i_size and ->zero_point
Fix potential tearing in using ->remote_i_size and ->zero_point by copying
i_size_read() and i_size_write() and using the same seqcount as for i_size.
We need to make sure that netfslib and the filesystems that use it always
hold i_lock whilst updating any of the sizes to prevent i_size_seqcount
from getting corrupted. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
A malicious connected siw peer can send an iWARP FPDU whose MPA length
field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller
than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP
parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode]
.hdr_len, but never compares mpa_len against that header length.
siw_tcp_rx_data() then derives
srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd
+ MPA_HDR_SIZE;
where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this
point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest
on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below
hdr_len - MPA_HDR_SIZE underflows to a negative int.
The signed value then flows into siw_proc_write()/siw_proc_rresp() as
bytes = min(srx->fpdu_part_rem, srx->skb_new);
is handed to siw_check_mem() as an int len (whose interval check
addr + len > mem->va + mem->len is satisfied for a valid base when
len is negative), and reaches siw_rx_data() -> siw_rx_kva() /
siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header
copy branch in skb_copy_bits() promotes that to size_t, producing a
multi-gigabyte read.
KASAN under a KUnit harness that drives the real kernel TCP receive
path -- a loopback AF_INET socketpair, the malformed FPDU written via
kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock
dispatching to siw_tcp_rx_data -- reports:
BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480
Read of size 4294967295 at addr ffff888...
Call Trace:
skb_copy_bits
siw_rx_kva
siw_rx_data
siw_check_mem
siw_proc_write
siw_tcp_rx_data
__tcp_read_sock
siw_qp_llp_data_ready
tcp_data_ready
tcp_data_queue
Add the missing invariant at the earliest point where the peer header
is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly
the value the siw transmitter uses as the minimum mpa_len for each
opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the
protocol contract. Out-of-range FPDUs terminate the connection with
TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which
is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields
do not agree on the start of an FPDU"), the correct framing-error
class for this inconsistency. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
If dcid is received for an already-assigned destination CID the spec
requires that both channels to be discarded, but calling l2cap_chan_del
may invalidate the tmp cursor created by list_for_each_entry_safe and
in fact it is the wrong procedure as the chan->dcid may be assigned
previously it really needs to be disconnected.
Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so
instead schedule l2cap_chan_timeout with delay 0 to close the channel
asynchronously. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: bind uarg before filling zerocopy skb
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: llsec: add skb_cow_data() before in-place crypto
llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(),
llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform
in-place cryptographic transformations on skb data. They build a
scatterlist with sg_init_one() pointing into the skb's linear data area
and then pass the same scatterlist as both src and dst to the crypto API
(e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt).
On the RX path, __ieee802154_rx_handle_packet() clones the received skb
before handing it to each subscriber via ieee802154_subif_frame(). The
cloned skb shares the same underlying data buffer via reference
counting. When llsec_do_decrypt() subsequently modifies this shared
buffer in place, it corrupts data that other clones -- potentially
belonging to other sockets or subsystems -- still reference.
On the TX path, similar data sharing can occur when an skb's head has
been cloned (skb_cloned() returns true).
The fix is to call skb_cow_data() before performing any in-place crypto
operation. skb_cow_data() ensures that the skb's data area is not
shared: if the skb head is cloned or the data spans multiple fragments,
it copies the data into a private buffer that can be safely modified in
place. This is the same pattern used by:
- ESP (net/ipv4/esp4.c, net/ipv6/esp6.c)
- MACsec (drivers/net/macsec.c)
- WireGuard (drivers/net/wireguard/receive.c)
- TIPC (net/tipc/crypto.c)
Without this guard, in-place crypto on shared skb data leads to:
- Silent data corruption of other skb clones
- Use-after-free when the crypto API scatterwalk writes through a
page that has already been freed by another clone's kfree_skb()
- Kernel crashes under concurrent 802.15.4 traffic with security
enabled (KASAN/KMSAN reports slab-use-after-free)
Found by 0sec (https://0sec.ai) using automated source analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Pin request_key_auth payload in instantiate paths
A: request_key() B: KEYCTL_INSTANTIATE_IOV
================ =========================
create auth key
store rka in auth key
wait for helper
get auth key
load rka from auth key
copy user payload
sleep on #PF
helper completed
detach and free rka
destroy auth key
wake up
use rka->target_key
**USE-AFTER-FREE**
Give request_key_auth payloads a refcount. Take a payload reference while
authkey->sem stabilizes the payload and revocation state. Hold that
reference across the instantiate and reject paths. Drop the auth key
owning reference from revoke and destroy.
[jarkko: Replaced the first two paragraphs of text with an actual
concurrency scenario.] |
