| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize oplock close with pending break ownership
close may abort an in-flight oplock break while another breaker already
holds an opinfo reference. Releasing pending_break wakes that waiter, but
without serializing the close transition with bit acquisition it can become
a new break owner through the test_and_set_bit() fast path. It can then
overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for
a dying opinfo.
Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode
list. Serialize that transition, pending_break acquisition, and
OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses
the race releases its ownership and returns -ENOENT. Explicitly wake
pending_break waiters during close so they can observe the terminal state.
Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with
OPLOCK_STATE_NONE. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: arp/nd proxy: fix reading neigh ha
Currently neigh ha address is read directly, but that can result in
torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot
to take a stable snapshot of the address. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-vf: fix workqueue and netdev race in probe/remove
Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode
does not queue work on a NULL workqueue. Unregister the netdev before
destroying the workqueue, and add proper probe error cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: add missing SRCU grace period in error path
nvme_alloc_ns() error path at out_unlink_ns removes ns from the
namespace head siblings list with list_del_rcu(&ns->siblings) but
does not wait for SRCU readers before freeing the namespace struct.
Multipath code iterates the head->list under srcu_read_lock() in
nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent
reader can still hold a reference to ns when kfree(ns) runs.
The normal removal path in nvme_ns_remove() correctly calls
synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for
in-progress readers. Add the same grace period in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm()
In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to
&matrix_mdev->pqap_hook before the update locks are acquired and the
mdev list is checked for a conflicting assignment. If another mdev is
already attached to the same KVM instance, the function returns -EPERM
without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook
pointing at the failing matrix_mdev instead of the mdev that legitimately
owns the KVM.
Since matrix_mdev->kvm is never set on this error path,
vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev
is later closed. If matrix_mdev is subsequently freed, any PQAP
instruction executed by the guest will dereference the stale pointer
through pqap_hook_rwsem, resulting in a use-after-free.
Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm()
function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check
for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine
whether it belongs to another mdev. This will alleviate the need to iterate
the matrix_dev->mdev_list list to see if the kvm object is assigned to
another mdev.This was introduced in v3 to alleviate the need to take the
mdevs_lock while iterating the list; however, this did not prevent a
potential race condition.
The pqap_hook_rwsem(write) is now performed inside
get_update_locks_for_kvm(), which is updated to acquire
pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering
is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem
in read mode while srcu is held under vcpu->mutex, establishing the
dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read).
The pqap_hook_rwsem is now released inside the
release_update_locks_for_kvm(), which is updated to release
pqap_hook_rwsem(write) between mdevs_lock and kvm->lock.
Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved
after release_update_locks_for_kvm(). Previously it was called while
kvm->lock was held; if it were ever the last reference, kvm_destroy_vm()
would run under kvm->lock, which would deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add TLB flush after MES queue eviction/suspension
MES (Micro Engine Scheduler) does not perform heavy-weight TLB
invalidation after unmapping queues, unlike HWS which does this
automatically. This causes a race condition where in-flight DMA
descriptors can access memory that has been unmapped, leading to page
faults and GPU queue hangs during SVM page migration.
The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest
failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU
compute queue hangs with packets submitted but never consumed.
Add kfd_flush_tlb() calls after MES queue removal in two locations:
- evict_process_queues_cpsch(): after all queues removed during eviction
- suspend_queues(): after debug/criu queue suspension (with mem_fence barrier)
This ensures all in-flight memory accesses from unmapped queues are
flushed before memory is freed or migrated.
(cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: check truncate permission under inode lock
nfsd_setattr() checks whether a size update needs NFSD_MAY_TRUNC
before it takes inode_lock(). The comparison uses the file size sampled
by that unlocked read, but the actual ATTR_SIZE update is applied later
under inode_lock() by notify_change().
This leaves a TOCTOU window for append-only files. If a client sends a
SETATTR that does not shrink the file at the time of the unlocked
sample, a concurrent append can extend the file before nfsd_setattr()
takes inode_lock(). notify_change() then applies a real truncation
without the NFSD_MAY_TRUNC check that rejects IS_APPEND(inode). The VFS
truncate syscall paths perform their own append-only checks before
calling notify_change(), so NFSD must make this decision against the
locked size it is about to change.
Split the write-count acquisition from the truncation permission check.
Keep get_write_access() before the locked setattr work, then recheck
whether the requested size is below i_size_read(inode) after inode_lock()
has been acquired and before notify_change(ATTR_SIZE). This also avoids
the plain unlocked inode->i_size load. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix UAF in check_new_map() on session freed during unlock
check_new_map() iterates mdsc->sessions[] and for each active session
drops mdsc->mutex to perform per-session operations. The forced-close
path (rank removed from map) correctly takes a reference on s via
ceph_get_mds_session() before releasing mdsc->mutex, but three other
paths do not:
Path A (address changed): mutex_unlock → mutex_lock(&s->s_mutex)
Path B (reconnect): mutex_unlock → send_mds_reconnect(mdsc, s)
Path C (active transition): mutex_unlock → mutex_lock(&s->s_mutex)
Without the extra reference, another thread can acquire mdsc->mutex
during the unlock window, call __unregister_session() which drops the
last reference on s, and free it. The original thread then accesses
freed memory via s->s_mutex.
Fix by adding ceph_get_mds_session(s) before each mutex_unlock and
ceph_put_mds_session(s) after the corresponding mutex_lock, matching
the pattern already used in the forced-close path.
Race timeline (Path A):
Thread A (check_new_map) Thread B (another map update
holds mdsc->mutex or session teardown)
-------------------------- --------------------------
s = mdsc->sessions[i]
(refcount == 1, held only by
sessions[] array)
mutex_unlock(&mdsc->mutex)
---> acquires mdsc->mutex
__unregister_session(mdsc, s)
sessions[i] = NULL
ceph_put_mds_session(s)
refcount: 1 -> 0
kfree(s) <--- freed!
mutex_lock(&s->s_mutex)
UAF on freed s->s_mutex |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind
For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer:
ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB
completion ghl_magic_poke_cb() re-arms the timer with mod_timer().
sony_remove() drained the timer with timer_delete_sync() and then freed
the URB with usb_free_urb():
timer_delete_sync(&sc->ghl_poke_timer);
usb_free_urb(sc->ghl_urb);
timer_delete_sync() does not block re-arming, and while the URB is in
flight the timer is not pending, so the sync delete is a no-op. A URB
completion that runs after the delete re-arms the timer, and usb_free_urb()
only drops a reference -- it does not kill an in-flight URB. sc is
allocated with devm_kzalloc() and freed once sony_remove() returns, so the
re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a
use-after-free from timer softirq. This is a disconnect/rmmod race.
Poison the URB first, then shut the timer down, before freeing the URB.
usb_poison_urb() kills any in-flight URB and permanently rejects further
submissions, so a poke timer that is still pending cannot re-submit the
URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs.
usb_kill_urb() would not suffice: it only cancels the in-flight URB and
leaves it submittable once it returns, so the pending timer could
re-submit it and put a fresh URB in flight over the freed sc.
timer_shutdown_sync() then drains any last callback and blocks re-arming.
The probe error path is unaffected: it is only reached before the timer
is armed.
Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget
emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds
and arms the poke timer, the poke URB is held in flight, the driver is
unbound (freeing sc), then the URB is released. The completion re-arms the
timer on the freed sc, and the re-armed timer fires ~8 s later:
BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0
Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0
ghl_magic_poke+0x98/0xb0
call_timer_fn+0x35/0x2b0
__run_timers+0x69c/0x9a0
run_timer_softirq+0x173/0x2a0
Allocated by task 169: sony_probe
Freed by task 338: devres_release_group <- hid_device_remove (sony_remove)
Found by 0sec (https://0sec.ai) using automated source analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/gem: reserve the bo in the info ioctl around the vma lookup
In the non-uvmm path, there could be a race between the info lookup
finding the vma, and the gem close path closing the vma leading
to a use-after-free.
Spotted with the help of Opus 4.6. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: svcauth_gss: enforce krb5 token minimum length
svcauth_gss_unwrap_priv() validates only an upper bound on the
wire-supplied opaque length before handing the buffer to
gss_unwrap():
if (len > xdr_stream_remaining(xdr))
goto unwrap_failed;
offset = xdr_stream_pos(xdr);
...
maj_stat = gss_unwrap(ctx, offset, offset + len, buf);
The wire value `len` flows unchanged as the upper bound into the
krb5 unwrap path, so a len in [0, 16] passes this check and is
handed to gss_unwrap(). For a krb5 v2 context that lands in
gss_krb5_unwrap_v2(), which reads the 16-byte RFC 4121 token
header fields at ptr+4 and ptr+6 and then calls rotate_left()
before any integrity check. With a sub-header length the header
reads run past the token, and _rotate_left()'s `shift %= buf->len`
path can divide by zero when buf->len has been driven to zero by
the truncated token. A header-only token (len == 16) is equally
invalid: with a non-zero RRC field and the opaque blob ending at
the XDR buffer boundary, rotate_left() builds a zero-length
subbuffer, reaching the same division.
Reject the token at the server entry point before it reaches the
krb5 unwrap core. A valid sealed RFC 4121 token must contain
the 16-byte header plus at least some encrypted payload.
Fix by adding a minimum-length check immediately after the
existing upper-bound check:
if (len <= GSS_KRB5_TOK_HDR_LEN)
goto unwrap_failed; |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: defer rq_argp and rq_resp free until after RCU grace period
svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously
via kfree(), but defers the rqstp struct free via kfree_rcu(). After
svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is
a window where RCU readers that started before list_del_rcu() can still
traverse the thread list and find the rqstp. These readers (e.g.
nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has
already been freed — a use-after-free.
Fix this by moving the kfree of rq_argp and rq_resp into an explicit
call_rcu() callback alongside the struct free. Resources not accessed
by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain
synchronously freed. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Make core-sched flips wait for in-flight selections
Core scheduling's pick_next_task() operates on all sibling rqs under one
acquisition of the shared core-wide lock. A ->pick_task() that releases the
rq lock leaves every sibling __lock momentarily free, letting
__sched_core_flip(false) complete mid-selection and rebind rq_lockp() under
it. The selection resumes on the split locks, touching sibling state it no
longer protects, and __schedule() finally releases a lock that was never
taken while leaking the one that was.
Count in-flight core-wide selections in the leader's rq->core_pick_in_flight
and make __sched_core_flip() wait for the count to drain. The count only
changes under the shared lock, which the flip holds while sampling, so no
other ordering is needed. The wait can repeat while selections overlap, but
the flip backs off between samples and flips are rare cookie-lifetime
events.
sched_core_cpu_deactivate() moves the count to the new leader - a stale copy
left behind would bias it forever if that CPU later returns as its own
leader. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: charger-manager: register regulators before exposing sysfs
charger_manager_remove() and the err_reg_extcon probe error path free each
charger regulator with regulator_put() before tearing down the power_supply
sysfs entries (power_supply_unregister()). charger_manager_remove() also
calls try_charger_enable(cm, false) after the regulator_put() loop. A
concurrent write to a charger's externally_control sysfs attribute that
lands between regulator_put() and power_supply_unregister() can run
charger_externally_control_store() and call try_charger_enable(), which,
when charging is enabled, dereferences the already-freed consumer handle.
When charging is enabled, try_charger_enable(cm, false) in .remove() also
dereferences the freed handles directly. Both leave use-after-free windows.
Symmetrically, probe registers the sysfs entries (power_supply_register)
before acquiring the regulators (regulator_get, inside
charger_manager_register_extcon), so userspace can reach externally_control
before the regulators are available.
Split charger_manager_register_extcon() on the sync/async boundary:
charger_manager_get_regulators() (regulator_get only, no async producer)
now runs before power_supply_register() so sysfs is not live before
regulators are available, and charger_manager_register_extcon() keeps only
the extcon notifier/work setup, still after power_supply_register() so a
power_supply_register() failure cannot reach extcon setup. This keeps the
sysfs setup/teardown ordering symmetric without introducing an asynchronous
producer on the earlier probe-error path.
Move power_supply_unregister() and try_charger_enable(cm, false) ahead of
the regulator_put() loop on both teardown paths, and adjust err_reg_extcon
(power_supply_unregister() then fall through err_regulator for
regulator_put(); get_regulators self-rolls back on its own failure).
This does not address the separate extcon-notifier-driven deref of the same
handles, which needs its own synchronization design.
Found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8788-charger: fix use-after-free on remove
lp8788_charger_remove() flushes charger_work before unregistering the
IRQs. An IRQ thread can queue charger_work after flush_work() has
returned. The work can then run after devres frees pchg and dereference
it in lp8788_charger_event().
Unregister the IRQs first. free_irq() waits for any running threaded
handler, so no handler can queue more work afterwards. Then use
cancel_work_sync() to cancel pending work or wait for running work to
finish.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: ucs1002: fix use-after-free on remove
ucs1002 has no remove callback, so unbind runs entirely through devm.
The alert IRQ handler queues the health_poll delayed work, and the work
reschedules itself while the chip reports a bad-health condition. devm
frees the alert IRQ, which only synchronizes the handler; it does not
cancel the delayed work, which can then run after devm frees the driver
data and dereference it.
Register health_poll with devm_delayed_work_autocancel() before the
alert IRQ is requested. devm then frees the IRQ before cancelling the
work, so the handler can no longer queue it and the work is cancelled
before the driver data is freed.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ravb: serialize PTP clock teardown
ravb_ptp_interrupt() can race with ravb_ptp_stop() and pass the clock to
ptp_clock_event() while ptp_clock_unregister() is freeing it. This can
lead to a use-after-free.
Use READ_ONCE() and WRITE_ONCE() for lockless access to the clock pointer.
Atomically detach it with xchg() before disabling PTP interrupts, then
synchronize all IRQs which can invoke ravb_ptp_interrupt() before
unregistering the detached clock.
A handler which read the old pointer completes before the clock is
unregistered, while later handlers read NULL and skip the event. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: stop killed, freed and out_of_sync sharing a byte
The three connection state flags are single-bit bitfields, so they occupy
one byte of struct smc_connection and every store to one is a
read-modify-write of the other two:
u8 killed : 1;
u8 freed : 1;
u8 out_of_sync : 1;
They are not written under a common lock. smc_cdc_msg_validate() sets
out_of_sync from the receive tasklet, while smc_conn_kill() sets killed
from process context under lock_sock(), and the receive path does not defer
to the backlog when the socket is owned -- smc_cdc_msg_recv() takes only
bh_lock_sock().
Give each flag its own byte so a store no longer touches its neighbours.
All readers test them as booleans and are unchanged. struct smc_connection
grows by two bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: gr2d/gr3d: Initialize address register map before HOST1X client is registered
The host1x_client_register() function is called just prior to register map
initialization loop, making the device available to userspace. This may
result in userspace attempting to submits a job before the register map is
initialized. Address this by moving register initialization before host1x
client registration. |
