| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add preempt_count_{sub,add} into btf id deny list
The recursion check in __bpf_prog_enter* and __bpf_prog_exit*
leave preempt_count_{sub,add} unprotected. When attaching trampoline to
them we get panic as follows,
[ 867.843050] BUG: TASK stack guard page was hit at 0000000009d325cf (stack is 0000000046a46a15..00000000537e7b28)
[ 867.843064] stack guard page: 0000 [#1] PREEMPT SMP NOPTI
[ 867.843067] CPU: 8 PID: 11009 Comm: trace Kdump: loaded Not tainted 6.2.0+ #4
[ 867.843100] Call Trace:
[ 867.843101] <TASK>
[ 867.843104] asm_exc_int3+0x3a/0x40
[ 867.843108] RIP: 0010:preempt_count_sub+0x1/0xa0
[ 867.843135] __bpf_prog_enter_recur+0x17/0x90
[ 867.843148] bpf_trampoline_6442468108_0+0x2e/0x1000
[ 867.843154] ? preempt_count_sub+0x1/0xa0
[ 867.843157] preempt_count_sub+0x5/0xa0
[ 867.843159] ? migrate_enable+0xac/0xf0
[ 867.843164] __bpf_prog_exit_recur+0x2d/0x40
[ 867.843168] bpf_trampoline_6442468108_0+0x55/0x1000
...
[ 867.843788] preempt_count_sub+0x5/0xa0
[ 867.843793] ? migrate_enable+0xac/0xf0
[ 867.843829] __bpf_prog_exit_recur+0x2d/0x40
[ 867.843837] BUG: IRQ stack guard page was hit at 0000000099bd8228 (stack is 00000000b23e2bc4..000000006d95af35)
[ 867.843841] BUG: IRQ stack guard page was hit at 000000005ae07924 (stack is 00000000ffd69623..0000000014eb594c)
[ 867.843843] BUG: IRQ stack guard page was hit at 00000000028320f0 (stack is 00000000034b6438..0000000078d1bcec)
[ 867.843842] bpf_trampoline_6442468108_0+0x55/0x1000
...
That is because in __bpf_prog_exit_recur, the preempt_count_{sub,add} are
called after prog->active is decreased.
Fixing this by adding these two functions into btf ids deny list. |
| In the Linux kernel, the following vulnerability has been resolved:
of: overlay: Call of_changeset_init() early
When of_overlay_fdt_apply() fails, the changeset may be partially
applied, and the caller is still expected to call of_overlay_remove() to
clean up this partial state.
However, of_overlay_apply() calls of_resolve_phandles() before
init_overlay_changeset(). Hence if the overlay fails to apply due to an
unresolved symbol, the overlay_changeset.cset.entries list is still
uninitialized, and cleanup will crash with a NULL-pointer dereference in
overlay_removal_is_ok().
Fix this by moving the call to of_changeset_init() from
init_overlay_changeset() to of_overlay_fdt_apply(), where all other
early initialization is done. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: use internal state to free traffic IRQs
If the system tries to close the netdev while iavf_reset_task() is
running, __LINK_STATE_START will be cleared and netif_running() will
return false in iavf_reinit_interrupt_scheme(). This will result in
iavf_free_traffic_irqs() not being called and a leak as follows:
[7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0'
[7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0
is shown when pci_disable_msix() is later called. Fix by using the
internal adapter state. The traffic IRQs will always exist if
state == __IAVF_RUNNING. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-timers: Ensure timer ID search-loop limit is valid
posix_timer_add() tries to allocate a posix timer ID by starting from the
cached ID which was stored by the last successful allocation.
This is done in a loop searching the ID space for a free slot one by
one. The loop has to terminate when the search wrapped around to the
starting point.
But that's racy vs. establishing the starting point. That is read out
lockless, which leads to the following problem:
CPU0 CPU1
posix_timer_add()
start = sig->posix_timer_id;
lock(hash_lock);
... posix_timer_add()
if (++sig->posix_timer_id < 0)
start = sig->posix_timer_id;
sig->posix_timer_id = 0;
So CPU1 can observe a negative start value, i.e. -1, and the loop break
never happens because the condition can never be true:
if (sig->posix_timer_id == start)
break;
While this is unlikely to ever turn into an endless loop as the ID space is
huge (INT_MAX), the racy read of the start value caught the attention of
KCSAN and Dmitry unearthed that incorrectness.
Rewrite it so that all id operations are under the hash lock. |
| In the Linux kernel, the following vulnerability has been resolved:
udp_tunnel: use netdev_warn() instead of netdev_WARN()
netdev_WARN() uses WARN/WARN_ON to print a backtrace along with
file and line information. In this case, udp_tunnel_nic_register()
returning an error is just a failed operation, not a kernel bug.
udp_tunnel_nic_register() can fail due to a memory allocation
failure (kzalloc() or udp_tunnel_nic_alloc()).
This is a normal runtime error and not a kernel bug.
Replace netdev_WARN() with netdev_warn() accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9317/1: kexec: Make smp stop calls asynchronous
If a panic is triggered by a hrtimer interrupt all online cpus will be
notified and set offline. But as highlighted by commit 19dbdcb8039c
("smp: Warn on function calls from softirq context") this call should
not be made synchronous with disabled interrupts:
softdog: Initiating panic
Kernel panic - not syncing: Software Watchdog Timer expired
WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond
unwind_backtrace:
show_stack
dump_stack_lvl
__warn
warn_slowpath_fmt
smp_call_function_many_cond
smp_call_function
crash_smp_send_stop.part.0
machine_crash_shutdown
__crash_kexec
panic
softdog_fire
__hrtimer_run_queues
hrtimer_interrupt
Make the smp call for machine_crash_nonpanic_core() asynchronous. |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: check device's attached status in compat ioctls
Syzbot identified an issue [1] that crashes kernel, seemingly due to
unexistent callback dev->get_valid_routes(). By all means, this should
not occur as said callback must always be set to
get_zero_valid_routes() in __comedi_device_postconfig().
As the crash seems to appear exclusively in i386 kernels, at least,
judging from [1] reports, the blame lies with compat versions
of standard IOCTL handlers. Several of them are modified and
do not use comedi_unlocked_ioctl(). While functionality of these
ioctls essentially copy their original versions, they do not
have required sanity check for device's attached status. This,
in turn, leads to a possibility of calling select IOCTLs on a
device that has not been properly setup, even via COMEDI_DEVCONFIG.
Doing so on unconfigured devices means that several crucial steps
are missed, for instance, specifying dev->get_valid_routes()
callback.
Fix this somewhat crudely by ensuring device's attached status before
performing any ioctls, improving logic consistency between modern
and compat functions.
[1] Syzbot report:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0
Call Trace:
<TASK>
get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline]
parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401
do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594
compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline]
comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273
__do_compat_sys_ioctl fs/ioctl.c:695 [inline]
__se_compat_sys_ioctl fs/ioctl.c:638 [inline]
__ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
... |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: multiq3: sanitize config options in multiq3_attach()
Syzbot identified an issue [1] in multiq3_attach() that induces a
task timeout due to open() or COMEDI_DEVCONFIG ioctl operations,
specifically, in the case of multiq3 driver.
This problem arose when syzkaller managed to craft weird configuration
options used to specify the number of channels in encoder subdevice.
If a particularly great number is passed to s->n_chan in
multiq3_attach() via it->options[2], then multiple calls to
multiq3_encoder_reset() at the end of driver-specific attach() method
will be running for minutes, thus blocking tasks and affected devices
as well.
While this issue is most likely not too dangerous for real-life
devices, it still makes sense to sanitize configuration inputs. Enable
a sensible limit on the number of encoder chips (4 chips max, each
with 2 channels) to stop this behaviour from manifesting.
[1] Syzbot crash:
INFO: task syz.2.19:6067 blocked for more than 143 seconds.
...
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5254 [inline]
__schedule+0x17c4/0x4d60 kernel/sched/core.c:6862
__schedule_loop kernel/sched/core.c:6944 [inline]
schedule+0x165/0x360 kernel/sched/core.c:6959
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7016
__mutex_lock_common kernel/locking/mutex.c:676 [inline]
__mutex_lock+0x7e6/0x1350 kernel/locking/mutex.c:760
comedi_open+0xc0/0x590 drivers/comedi/comedi_fops.c:2868
chrdev_open+0x4cc/0x5e0 fs/char_dev.c:414
do_dentry_open+0x953/0x13f0 fs/open.c:965
vfs_open+0x3b/0x340 fs/open.c:1097
... |
| In the Linux kernel, the following vulnerability has been resolved:
usb: storage: Fix memory leak in USB bulk transport
A kernel memory leak was identified by the 'ioctl_sg01' test from Linux
Test Project (LTP). The following bytes were mainly observed: 0x53425355.
When USB storage devices incorrectly skip the data phase with status data,
the code extracts/validates the CSW from the sg buffer, but fails to clear
it afterwards. This leaves status protocol data in srb's transfer buffer,
such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can
lead to USB protocols leaks to user space through SCSI generic (/dev/sg*)
interfaces, such as the one seen here when the LTP test requested 512 KiB.
Fix the leak by zeroing the CSW data in srb's transfer buffer immediately
after the validation of devices that skip data phase.
Note: Differently from CVE-2018-1000204, which fixed a big leak by zero-
ing pages at allocation time, this leak occurs after allocation, when USB
protocol data is written to already-allocated sg pages. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: drop unnecessary user-triggerable WARN_ONCE in verifierl log
It's trivial for user to trigger "verifier log line truncated" warning,
as verifier has a fixed-sized buffer of 1024 bytes (as of now), and there are at
least two pieces of user-provided information that can be output through
this buffer, and both can be arbitrarily sized by user:
- BTF names;
- BTF.ext source code lines strings.
Verifier log buffer should be properly sized for typical verifier state
output. But it's sort-of expected that this buffer won't be long enough
in some circumstances. So let's drop the check. In any case code will
work correctly, at worst truncating a part of a single line output. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel()
Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from
the fact that in case of early device detach via pcl818_detach(),
subdevice dev->read_subdev may not have initialized its pointer to
&struct comedi_async as intended. Thus, any such dereferencing of
&s->async->cmd will lead to general protection fault and kernel crash.
Mitigate this problem by removing a call to pcl818_ai_cancel() from
pcl818_detach() altogether. This way, if the subdevice setups its
support for async commands, everything async-related will be
handled via subdevice's own ->cancel() function in
comedi_device_detach_locked() even before pcl818_detach(). If no
support for asynchronous commands is provided, there is no need
to cancel anything either.
[1] Syzbot crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762
...
Call Trace:
<TASK>
pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115
comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207
do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline]
comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
... |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: eeprom: fix null-deref on genl_info in dump
The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on
genl_info in dump") is also needed for ethtool eeprom. |
| Uncontrolled resource consumption in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable denial of service. |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Insufficient control flow management in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added
In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I
missed the case where state creation fails between full
initialization (->init_state has been called) and being inserted on
the lists.
In this situation, ->init_state has been called, so for IPcomp
tunnels, the fallback tunnel has been created and added onto the
lists, but the user state never gets added, because we fail before
that. The user state doesn't go through __xfrm_state_delete, so we
don't call xfrm_state_delete_tunnel for those states, and we end up
leaking the FB tunnel.
There are several codepaths affected by this: the add/update paths, in
both net/key and xfrm, and the migrate code (xfrm_migrate,
xfrm_state_migrate). A "proper" rollback of the init_state work would
probably be doable in the add/update code, but for migrate it gets
more complicated as multiple states may be involved.
At some point, the new (not-inserted) state will be destroyed, so call
xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states
will have their fallback tunnel cleaned up during __xfrm_state_delete,
which solves the issue that b441cf3f8c4b (and other patches before it)
aimed at. All states (including FB tunnels) will be removed from the
lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). |
| In the Linux kernel, the following vulnerability has been resolved:
net: core: prevent NULL deref in generic_hwtstamp_ioctl_lower()
The ethtool tsconfig Netlink path can trigger a null pointer
dereference. A call chain such as:
tsconfig_prepare_data() ->
dev_get_hwtstamp_phylib() ->
vlan_hwtstamp_get() ->
generic_hwtstamp_get_lower() ->
generic_hwtstamp_ioctl_lower()
results in generic_hwtstamp_ioctl_lower() being called with
kernel_cfg->ifr as NULL.
The generic_hwtstamp_ioctl_lower() function does not expect
a NULL ifr and dereferences it, leading to a system crash.
Fix this by adding a NULL check for kernel_cfg->ifr in
generic_hwtstamp_ioctl_lower(). If ifr is NULL, return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
If fs_info->super_copy or fs_info->super_for_commit allocated failed in
btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info().
Otherwise btrfs_check_leaked_roots() would access NULL pointer because
fs_info->allocated_roots had not been initialised.
syzkaller reported the following information:
------------[ cut here ]------------
BUG: unable to handle page fault for address: fffffffffffffbb0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 64c9067 P4D 64c9067 PUD 64cb067 PMD 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 1402 Comm: syz.1.35 Not tainted 6.15.8 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...)
RIP: 0010:arch_atomic_read arch/x86/include/asm/atomic.h:23 [inline]
RIP: 0010:raw_atomic_read include/linux/atomic/atomic-arch-fallback.h:457 [inline]
RIP: 0010:atomic_read include/linux/atomic/atomic-instrumented.h:33 [inline]
RIP: 0010:refcount_read include/linux/refcount.h:170 [inline]
RIP: 0010:btrfs_check_leaked_roots+0x18f/0x2c0 fs/btrfs/disk-io.c:1230
[...]
Call Trace:
<TASK>
btrfs_free_fs_info+0x310/0x410 fs/btrfs/disk-io.c:1280
btrfs_get_tree_subvol+0x592/0x6b0 fs/btrfs/super.c:2029
btrfs_get_tree+0x63/0x80 fs/btrfs/super.c:2097
vfs_get_tree+0x98/0x320 fs/super.c:1759
do_new_mount+0x357/0x660 fs/namespace.c:3899
path_mount+0x716/0x19c0 fs/namespace.c:4226
do_mount fs/namespace.c:4239 [inline]
__do_sys_mount fs/namespace.c:4450 [inline]
__se_sys_mount fs/namespace.c:4427 [inline]
__x64_sys_mount+0x28c/0x310 fs/namespace.c:4427
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x92/0x180 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f032eaffa8d
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: fix lock inversion in vsock_assign_transport()
Syzbot reported a potential lock inversion deadlock between
vsock_register_mutex and sk_lock-AF_VSOCK when vsock_linger() is called.
The issue was introduced by commit 687aa0c5581b ("vsock: Fix
transport_* TOCTOU") which added vsock_register_mutex locking in
vsock_assign_transport() around the transport->release() call, that can
call vsock_linger(). vsock_assign_transport() can be called with sk_lock
held. vsock_linger() calls sk_wait_event() that temporarily releases and
re-acquires sk_lock. During this window, if another thread hold
vsock_register_mutex while trying to acquire sk_lock, a circular
dependency is created.
Fix this by releasing vsock_register_mutex before calling
transport->release() and vsock_deassign_transport(). This is safe
because we don't need to hold vsock_register_mutex while releasing the
old transport, and we ensure the new transport won't disappear by
obtaining a module reference first via try_module_get(). |
