| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 passes potentially unsafe content into ImageMagick when resizing images. SVG and EPS were accepted as valid image types for contact photo upload and conversion, and both formats can reference external resources and invoke ImageMagick delegates when processed. Upstream fixed this in the commit “Fix passing potentally unsafe attachment content into ImageMagick on image resize”, which removes svg and eps from the accepted types. |
| Refitter is a tool for generating a C# REST API client using the Refit library. Prior to 2.1.1, the `refitter` dotnet tool invokes `NJsonSchema` with unsafe defaults for `$ref` resolution when generating Refit interfaces and contracts from attacker-controlled or attacker-influenced OpenAPI descriptions. Remote `http(s)` references cause requests from the developer or CI host and inline untrusted remote schema content into generated output. Absolute local file paths and relative `../` traversal outside the input directory also resolve and inline local content, permitting arbitrary local-file disclosure. The demonstrated chain stops at server-side request forgery, remote file inclusion, and local file inclusion, not code execution: Refit sets the base URL at runtime, enum values use verbatim-string doubling, and string defaults are escaped. This issue is fixed in version 2.1.1. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the PendSV handler of the Cortex-M module ports saves a preempted user-mode module thread's registers in privileged mode at addresses taken from the thread's stack pointer, without checking that pointer against the thread's stack. A user-mode, memory-protected module can thereby write up to nine words, eight of its choosing, or 25 with floating-point state, into memory immediately below any region it may write, and read back what is stored there. |
| PHP has various global state that temporarily points into request memory. In some scenarios, global state may not be correctly reset, or may be repopulated after being reset. The global state may then refer to request memory even after it has been freed. Subsequent requests may read or branch on this stale state before it is fully initialized. Multiple strategies can trigger this condition and produce remote code execution (RCE). |
| PHP uses longjmp() for out-of-memory (OOM) errors to exit the current context and abort handling of the request. Some contexts may not properly account for this scenario and leave request memory in an uninitialized state before performing an allocation. The subsequent request cleanup procedure may read or branch on this memory. Multiple OOM strategies can consistently trigger this condition and lead to remote code execution (RCE). |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: unshare the skb before writing the control block
bcmgenet stores first_cb, last_cb and bytes_sent in the skb control
block and reads them back on completion to free the skb and credit BQL.
ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit
a shared skb that is still in the ring. The next transmit overwrites
last_cb, so the earlier slots complete without crediting their bytes
and BQL stalls the queue until the watchdog resets it.
Unshare the skb before writing the control block.
Reproduce with pktgen in clone_skb mode, which hands the driver the same
skb while earlier copies are still in the ring:
modprobe pktgen
pg=/proc/net/pktgen
echo "add_device eth0" > $pg/kpktgend_0
echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0
echo "dst 192.0.2.1" > $pg/eth0
echo "clone_skb 8" > $pg/eth0
echo "count 0" > $pg/eth0
echo start > $pg/pgctrl &
sleep 5
echo stop > $pg/pgctrl
wait
cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight
inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at
zero. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: st: Fix use-after-free race between st_remove() and st_open()
st_remove() drops the probe reference on the scsi_tape with kref_put()
and only afterwards removes its index from st_index_idr. If that was the
last reference, scsi_tape_release() frees the structure while it is
still published in the idr.
scsi_tape_get(), called from st_open(), looks up the tape in
st_index_idr and takes a reference under st_ref_mutex and
st_index_lock. remove_cdevs() does not wait for opens that are already
past chrdev_open(), so an open that is blocked on st_ref_mutex while
st_remove() holds it can take the mutex as soon as st_remove() drops it,
find the freed tpnt in the idr and call kref_get() on it:
BUG: KASAN: slab-use-after-free in st_open
Write of size 4 ...
st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291)
chrdev_open
...
Freed by task ...:
kfree
st_remove (drivers/scsi/st.c:4512)
Remove the index from the idr before dropping the reference, all under
st_ref_mutex. A concurrent scsi_tape_get() now either runs first and
holds a valid reference that keeps the tape alive, or runs afterwards
and finds nothing, so st_open() fails with -ENXIO.
This restores the ordering st_remove() had before the conversion to
st_index_idr, where the tape was unpublished from scsi_tapes[] before
the final kref_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: fix use-after-free bug when adding shared proxies
The GPIO lookup table can stay alive for longer than the kobject whose
name string's address we're assigning to lookup->dev_id. Fix a potential
UAF by duplicating the string. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix race condition in split transaction handling
For a split transaction, either fw_core_handle_response() or
split_transaction_timeout_callback() may manipulate the same transaction
entry in the pending transaction list. The return value of timer_delete()
is used to determine which function handles the entry. If the transaction
is a split transaction and timer_delete() returns zero, the timeout
callback may already be running. In this case, the response handler must
leave the entry in the list for the timeout callback to remove.
A previous code refactoring broke this behavior, introducing a race
condition in which both functions could process the same transaction.
This could lead to a use-after-free on the transaction initiator side.
Fix the regression by ensuring that the response handler does not process
the transaction when timer_delete() returns zero. The timeout callback is
responsible for removing the entry from the pending transaction list. |
| when EAP runs with -secmgr, the openjdk-orb's JDKBridge honours attacker-supplied CDR codebase URLs during object unmarshalling on :3528, allowing an unauthenticated attacker to load and instantiate arbitrary classes from a remote URL in the server JVM before EJB security interceptors run. |
| This issue was addressed by enforcing library validation on the affected binaries. This issue is fixed in Xcode 27. An app may be able to break out of its sandbox. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free inet_opt and ireq_opt after an RCU grace period
tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the
child socket (newinet->inet_opt) without copying it.
Another cpu can concurrently process a retransmitted SYN for the same
request socket, and send a SYNACK from tcp_check_req().
tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt
under rcu_read_lock() only, and ip_build_and_send_pkt() and
ip_options_build() then read opt->optlen twice.
Note that the SYNACK timer itself is not an issue: it holds a
reference on its request socket, and inet_csk_reqsk_queue_drop()
calls timer_delete_sync() before the child can be freed.
Since commit 079096f103fa ("tcp/dccp: install syn_recv requests
into ehash table"), request sockets are processed without holding
the listener lock, so nothing prevents the child socket from being
freed while the SYNACK is still being built. TCP child sockets do
not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt
with a plain kfree(), leading to a use-after-free in
ip_options_build().
A similar issue exists with request socket migration
(net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE
program). reqsk_timer_handler() clones the request socket with
inet_reqsk_clone(), so that the old request socket and its clone
share the same ireq_opt, then reqsk_migrate_reset() clears the
pointer in the old one. Another cpu holding a reference on the old
request socket can still be using these options (sending a SYNACK,
or creating a child in tcp_v4_syn_recv_sock()) when the clone is
freed, and tcp_v4_reqsk_destructor() also uses a plain kfree().
Readers already use RCU, and other paths replacing inet_opt
(do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use
kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and
tcp_v4_reqsk_destructor() as well.
IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock()
duplicates the options. tcp_v6_reqsk_destructor() has the same
migration issue with ipv6_opt, which is only set by CALIPSO. This
will be addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure
rds_rdma_cm_event_handler_cmn() hands the return value of
rdma_resolve_route() straight back to the rdma_cm on
RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM
from the route work allocation, an SA query that cannot be set up, a
RoCE route with no usable device - makes addr_handler() destroy the
id the event was delivered on. That id is ic->i_cm_id, and nothing
clears the pointer: the connection sits in RDS_CONN_CONNECTING with a
freed id until its shutdown calls rdma_disconnect() and
rdma_destroy_id() on it.
The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect()
forces a zero return while ic->i_cm_id == cm_id, as the comment there
explains. Do the same here - drop the connection and return 0 - so
the id stays RDS's to destroy from the shutdown, and the reconnect
gets a fresh one. |
| In the Linux kernel, the following vulnerability has been resolved:
pipe: preserve existing fasync readers on writer setup failure
F_SETFL and FIOASYNC decide whether to invoke ->fasync() before
pipe_fasync() takes pipe->mutex. Two enables of one O_RDWR FIFO can
therefore both enter the callback.
fasync_helper() allocates before checking for an existing entry. If the
first enable installs both entries, a second enable can update the
reader entry and then fail the allocation for the writer entry. The
error path removes the pre-existing reader entry, clearing FASYNC while
the writer entry remains registered. __fput() then skips ->fasync(), so a
later pipe notification can dereference the freed file or its f_owner.
An unprivileged memory-pressure reproducer triggers a KASAN
slab-use-after-free in send_sigio() through this path.
Keep the reader helper's result and undo the registration only if this
call added it. The pipe mutex serializes changes to both lists, so a
failed new registration still removes its reader, while a failed
duplicate preserves the existing registrations and FASYNC. Successful
duplicate enables continue to update fa_fd as before. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Free the eventfs_inode after an rcu grace period too
tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that
dentry->d_fsdata points to, and ->d_revalidate() is called in rcu
pathwalk mode with nothing but rcu_read_lock() held. The dentry itself
stays around for such a walker, but tracefs_d_release() drops its
reference to the eventfs_inode when the dentry is killed, and
release_ei() then frees it after a grace period of eventfs_srcu. An
SRCU grace period doesn't wait for rcu_read_lock() sections, so the
walker can read an eventfs_inode that is already gone.
With a pathwalk held up in tracefs_d_revalidate() while the dentry goes
away:
BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90
Read of size 1 at addr ff1100010152d8d0 by task walker/97
Call Trace:
<TASK>
tracefs_d_revalidate+0x76/0x90
lookup_fast+0x320/0x640
path_lookupat+0x160/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[...]
Allocated by task 1:
__kmalloc_cache_noprof+0x249/0x560
eventfs_create_dir+0x7a/0x590
event_create_dir+0x2fb/0xcf0
trace_add_event_call+0xbf/0x150
[...]
Freed by task 11:
kfree+0x1db/0x5b0
srcu_invoke_callbacks+0x3a3/0x620
process_one_work+0x937/0x1810
worker_thread+0x4f1/0xd60
Before commit 8e556432477e ("eventfs: Use SRCU for freeing
eventfs_inodes") release_ei() used call_rcu(), which covered the walker,
while eventfs_iterate() needs the SRCU grace period. Wait for both and
chain call_rcu() from the SRCU callback. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: keep the eviction fence until the last handle is closed
amdgpu_gem_object_close() detaches the user queue eviction fence from
the BO before it checks bo_va->ref_count, so closing any handle of a BO
removes the fence, even when the file still has another handle to the
BO and the bo_va with its GPU mappings stays. The BO can then be evicted
without suspending the user queues of the file, which keep accessing it
through mappings that are only marked for update.
Seen on navi31 with a SDMA user queue: a BO opened twice in the same
file (GEM_FLINK + GEM_OPEN) loses its eviction fence when the second
handle is closed (traced attach/detach of the fence):
attach bo=ffff8c78a6c84c00
GEM_CLOSE handle=7
detach bo=ffff8c78a6c84c00
while handle 6 and the mapping are still in use.
Only detach the fence when the last reference to the bo_va goes away,
matching amdgpu_gem_object_open(), which attaches it only when the
bo_va is created. With this the fence stays until the file is closed.
(cherry picked from commit 8387982f03d4026b7dc11b0b5e3118298eee4d6a) |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port->mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: do not inherit the Rx association on clone
sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into
every socket accepted from a listener without taking a reference, while
inet_sock_destruct() puts for every inet socket. psp_twsk_init() does
refcount_inc() for the timewait socket, so a child closing through
TIME_WAIT cancels its own put and leaves the association with one
reference and N timewait sockets holding the same pointer. Closing the
listener frees it, and the timewait timers then put freed memory.
Rejecting the association on a listening socket is not sufficient: a socket
can acquire one while established and then be turned back into a listener,
because tcp_disconnect() leaves sk->psp_assoc in place.
BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0
Write of size 4 at addr ffff888110f9255c by task swapper/7/0
psp_twsk_assoc_free+0x6f/0xf0
inet_twsk_put+0xda/0x1b0
call_timer_fn+0x53/0x2e0
__run_timers+0x764/0xa80
Freed by task 99:
kfree+0x1a7/0x500
process_one_work+0x7ec/0x1100
An association carries a per-connection SPI and key, so a child must not
inherit the parent's. Clear it on clone. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: entry: gate shadow call stack reload on sstatus.SPP, not tp
Under CONFIG_SHADOW_CALL_STACK, handle_exception() reloads the kernel
shadow call stack pointer (gp) only when the trap came from userspace.
It made that decision with scs_load_current_if_task_changed, which
compares the trap-time tp (read back from sscratch into s5) against the
current tp:
beq \prev, tp, _skip_scs
scs_load_current
_skip_scs:
tp is a user-writable register. A user task that sets tp to the
linear-map address of its own task_struct (¤t) before trapping
makes the comparison succeed (can achieve by brute force with KASLR
enable under our test), so the kernel skips scs_load_current and
keeps running with the gp that userspace left in place. Under
CONFIG_SHADOW_CALL_STACK gp is the shadow call stack pointer and
load_global_pointer is a no-op, so the compiler-emitted
"sd ra, -8(gp)" / "ld ra, -8(gp)" in every non-leaf function then write
to, and return through, an attacker-controlled address -- an
unprivileged kernel arbitrary-write and control-flow-hijack primitive.
The poisoned gp is saved to task_struct.scs_sp on return, so the reload
is skipped on every subsequent entry as well.
Decide "came from userspace" from the hardware sstatus.SPP bit (already
in s1 at this point) instead of from tp, mirroring the check that
ret_from_exception already uses a few instructions later. SPP is
written by hardware on trap entry and cannot be forged from U-mode.
Legitimate behaviour is unchanged: user entries (SPP=0) reload the task
shadow call stack, nested kernel entries (SPP=1) skip it. |
| Use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 159 and Thunderbird 159. |
