Export limit exceeded: 421046 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421046 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421046 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421046 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (421046 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74505 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: Fix UAF at error handling during probe Although 6fire driver had a few fixes for dealing with the early error handling during the probe phase, it forgot a pending URB before freeing the resources, which may lead to a UAF. This patch addresses it by doing the almost same cleanup procedure like the normal disconnect phase at the error path. | ||||
| CVE-2026-74499 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output() snd_usbmidi_akai_output() computes its fill-loop bound buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1; as a signed int, so a small device-advertised bulk-OUT max_transfer makes buf_end negative. The loop guard then compares the u32 urb->transfer_buffer_length against that negative int: the usual arithmetic conversion turns buf_end into a large unsigned value, so the guard stays true and each iteration keeps appending SysEx framing and payload bytes past the end of the URB transfer buffer, which is only max_transfer bytes long. A USB device that advertises a tiny bulk-OUT endpoint can therefore trigger an attacker-length- and content-controlled heap out-of-bounds write when a process writes to the created /dev/snd/midiC*D* node. Return early when there is no room for even one SysEx, so the loop is never entered with a bound that would wrap. The loop is the last statement of the function, so bailing out is equivalent to it not running. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74498 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set When a USB audio endpoint requests full packet transfers via the fill_max descriptor flag, data_ep_set_params() promotes ep->curpacksize to ep->maxpacksize. However, maxsize is left at the original sample-rate derived value. Since u->buffer_size is allocated as maxsize * packets, the resulting DMA buffer is far too small for the requested transfer length. When the USB host controller streams up to curpacksize bytes per packet, it writes past the end of the buffer via DMA, corrupting kernel heap memory. Update maxsize to curpacksize when fill_max is set so that the allocated DMA buffer size matches the actual transfer request size. [ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] | ||||
| CVE-2026-74487 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: restore write access when removing an entry Registering an entry with the MISC_FMT_OPEN_FILE flag opens the interpreter via open_exec() which denies write access to it for as long as the entry exists. Removing the entry closes the interpreter file via filp_close() but never restores write access, leaving the inode's i_writecount permanently negative. Opening the interpreter for writing keeps failing with ETXTBSY long after the entry is gone until the inode is evicted from the inode cache. Commit 90f601b497d7 ("binfmt_misc: restore write access before closing files opened by open_exec()") fixed the same imbalance in the error path of bm_register_write() but the actual removal path has been leaking the write denial since the introduction of the flag. Restore write access in put_binfmt_handler() before closing the interpreter file. | ||||
| CVE-2026-74486 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: use exe_file_deny_write_access() for the interpreter clone For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the registered interpreter file and denies write access to the clone via plain deny_write_access(). The clone is installed as bprm->interpreter and later released by the exec machinery through exe_file_allow_write_access() which skips the i_writecount increment for files with FMODE_FSNOTIFY_HSM set. The deny and allow side can therefore come to different conclusions when pre-content watches are in play: if a pre-content watch is added to the interpreter after registration every subsequent exec through that entry takes a write denial on the clone that is never paired with a write allowance, driving the interpreter inode's i_writecount further down with each exec and leaving the interpreter unwritable even after the entry and all its users are gone. Take the write denial via exe_file_deny_write_access() so both sides of the pairing base their decision on the same file mode, and propagate failure instead of silently ignoring it: an interpreter that is concurrently open for writing now fails the exec with ETXTBSY, exactly like an interpreter freshly opened via open_exec() would. | ||||
| CVE-2026-74484 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't let an 'F' entry pin its own instance An entry registered with 'F' opens its interpreter at registration time and holds that file until the entry is freed. Any entry nobody removes by hand only gets closed once the binfmt_misc superblock is shut down. If the interpreter lives on a mount that keeps that superblock alive the two pin each other: binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb TL;DR the file is never closed. Once the mount namespace is gone there is nothing left to unregister through either. There are two ways to trigger this bug: - Point the interpreter at the instance itself. Its files are regular files owned by the mounter and both bm_get_inode() and simple_fill_super() leave i_op at empty_iops. So notify_change() falls back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC and so open_exec() accepts it. - Use the instance as an overlayfs lower layer. The overlay superblock holds a clone_private_mount() of every layer until it is destroyed and that clone is in no namespace. So umount_tree() never reaches it. That's a DoS. And it isn't only the superblock that leaks. It pins the user namespace it was mounted in, so every iteration permanently eats one of the caller's user namespace charges. So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on the instance's own files and s_stack_depth makes overlayfs reject the layer before it ever takes a clone. That also covers the ecryptfs and fuse passthrough variants. What 'F' promises is unchanged. The stable tag is narrower than the Fixes tags on purpose. Before sandboxed mounts this needed global root against the single instance everyone shares, and the change doesn't apply to those trees anyway. Note that SB_I_NODEV is implicitly raised for userns mounts but raise it explicitly here as well. | ||||
| CVE-2026-74464 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. | ||||
| CVE-2026-74460 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: validate CPC message lengths ems_usb_read_bulk_callback() walks CPC messages packed in one USB receive buffer. Check that each declared message fits in the URB payload. Also require the type-specific payload to cover the fields used by the CAN, state, error and overrun handlers. | ||||
| CVE-2026-74458 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it. | ||||
| CVE-2026-74457 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). | ||||
| CVE-2026-74455 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: validate uCAN receive record lengths pcan_usb_fd_decode_buf() walks uCAN records packed in one USB receive buffer. Require each record to contain the fixed header for its type, and verify CAN payload bytes before copying them into the skb. | ||||
| CVE-2026-74445 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: reject DX_BIND_QUERY without a DX context vmw_cmd_dx_bind_query() unconditionally dereferences sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer dereference from any render-node fd by submitting an execbuf with dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY opcode in the command stream: dx_ctx_node is left NULL and the kernel oopses on the assignment. The same NULL is then re-read in vmw_resources_reserve() via vmw_context_get_dx_query_mob(). All sibling DX handlers fail-close on a missing dx_ctx_node using VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up front before any relocation state is published. | ||||
| CVE-2026-74442 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while still leaving the rest of the driver in a state that calls vmw_vkms_cleanup() at module unload: 1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or returning an oversized buffer -- the common case on hosts without a VBLANK guestinfo entry -- early-returned before the workqueue allocation. 2. alloc_ordered_workqueue() returning NULL on memory pressure. vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which dereferences wq->name and panics. Fix the first case by removing the early return: vmw->vkms_enabled is already false on the rpci-failure path so no work will ever be queued, and allocating the workqueue unconditionally keeps the control flow simple. Fix the second case by guarding the cleanup with a NULL check, since alloc_ordered_workqueue() can still fail under low memory. | ||||
| CVE-2026-74424 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbcon: fix NULL pointer dereference for a console without vc_data fbcon_new_modelist() runs when a framebuffer's modelist changes. For each console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and passes the vc_num to fbcon_set_disp(). This assumes a console with a mode set has a vc_data, but it can be NULL. fbcon_set_disp() sets fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the mode set after the vc_data is freed. fbcon_new_modelist() then dereferences the NULL vc_data. Keep fb_display[i].mode set only while the console has a vc_data. Check vc_data before setting the mode in fbcon_set_disp(), and clear the mode in fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips such consoles. | ||||
| CVE-2026-74416 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix memory leak in radeon_ring_restore() on lock failure radeon_ring_restore() takes ownership of the data buffer allocated by radeon_ring_backup(). The caller (radeon_gpu_reset()) only frees it in the non-restore branch; in the restore branch it relies on radeon_ring_restore() to free it. If radeon_ring_lock() fails, the function returned early without calling kvfree(data), leaking the ring backup buffer on every GPU reset that fails at the lock stage. During repeated GPU resets this causes cumulative kernel memory exhaustion. Free data before returning the error. | ||||
| CVE-2026-74399 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: evm: terminate and bound the evm_xattrs read buffer evm_read_xattrs() allocates size + 1 bytes, fills them from the list of enabled xattrs, and then passes strlen(temp) to simple_read_from_buffer(). When no configured xattrs are enabled, the fill loop stores nothing and temp[0] remains uninitialized, so strlen() reads beyond initialized memory. Explicitly terminate the buffer after allocation, use snprintf() for each formatted line, and pass the accumulated length, without risk of truncation, to simple_read_from_buffer(). | ||||
| CVE-2026-74395 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list before initializing the fields used by the shared error path. If eventfd_ctx_fdget() then fails, the unwind path dereferences event_sub->ev_file in uverbs_uobject_put() and calls subscribe_event_xa_dealloc() with an unset xa_key_level1. subscribe_event_xa_alloc() creates the XA entry exactly once for a given key_level1, on the first occurrence of that key. The unwind path must therefore call subscribe_event_xa_dealloc() exactly once for it as well. Enforce that by adding devx_key_in_sub_list() and calling subscribe_event_xa_dealloc() only when the last matching pending entry is being cleaned up. | ||||
| CVE-2026-74382 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_bpf: prevent unbounded recursion in offload rollback Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd(). Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then swaps prog/oldprog and recursively calls itself to roll back. But bpf_tc_accept=0 makes the rollback fail too, which triggers yet another rollback frame with the same arguments, and so on until the stack is exhausted. bpf_tc_accept is just a convenient knob for the reproducer. Any driver whose tc_setup_cb_replace() fails twice in a row can hit the same loop, so this is not a netdevsim-only issue. Two ways to fix it: 1) Have the rollback call tc_setup_cb_add() on oldprog instead of re-entering cls_bpf_offload_cmd(). 2) Mark the rollback frame with a flag and skip a second-level rollback from inside it. Go with (2). It is the smaller change and keeps the original behaviour: the rollback still goes through tc_setup_cb_replace(), so the driver gets one real chance to restore its state. If that attempt also fails, we just return the original error instead of recursing. [1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u | ||||
| CVE-2026-74379 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dax/kmem: account for partial discontiguous resource upon removal When dev_dax_kmem_probe() partially succeeds (at least one range is mapped) but a subsequent range fails request_mem_region() or add_memory_driver_managed(), the probe silently continues, ultimately returning success, but with the corresponding range resource NULL'ed out. dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if the underlying resource exists. When remove_memory() is called later, it returns 0 because the memory was never added which causes dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can be removed and attempts cleanup on a NULL pointer. Fix this by skipping these ranges altogether, noting that these cases are considered success, such that the cleanup is still reached when all actually-added ranges are successfully removed. | ||||
| CVE-2026-74351 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: rebase copied fsdlm LVB pointers in locking_state The locking_state debugfs iterator snapshots struct ocfs2_lock_res by value under ocfs2_dlm_tracking_lock and later formats that copy in ocfs2_dlm_seq_show(). That is fine for the inline fields, but the userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still points into the original lockres owner, so teardown can free that container before the debugfs dump walks the raw LVB bytes. Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw LVB. The seq snapshot already carries the inline LVB storage reserved in struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes without borrowing the original lockres lifetime. The buggy scenario involves two paths, with each column showing the order within that path: locking_state reader: lockres teardown: 1. ocfs2_dlm_seq_start()/next() 1. file release or another owner copies struct ocfs2_lock_res teardown reaches 2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free() the copied row 2. the lockres is removed from the 3. ocfs2_dlm_lvb() follows the tracking list copied sb_lvbptr 3. the owner frees the original lockres container Validation reproduced this kernel report: KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430 RIP: 0033:0x7f8ec4b1e29d The buggy address belongs to the object at ffff88810a1e0800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 368 bytes inside of freed 1024-byte region [ffff88810a1e0800, ffff88810a1e0c00) Read of size 1 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 seq_read_iter+0x29d/0x790 seq_read+0x20a/0x280 find_held_lock+0x2b/0x80 rcu_read_unlock+0x18/0x70 full_proxy_read+0x9e/0xd0 vfs_read+0x12c/0x590 ksys_read+0xd2/0x170 do_user_addr_fault+0x65a/0x890 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 ocfs2_file_open+0x13e/0x300 do_dentry_open+0x233/0x7f0 vfs_open+0x5a/0x1b0 path_openat+0x66d/0x1540 do_file_open+0x186/0x2b0 do_sys_openat2+0xce/0x150 __x64_sys_openat+0xd0/0x140 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 ocfs2_file_release+0x138/0x260 __fput+0x1df/0x4b0 fput_close_sync+0xd2/0x170 __x64_sys_close+0x55/0x90 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||