| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: take invalidate_lock in ntfs_filemap_page_mkwrite()
ntfs_filemap_page_mkwrite() calls iomap_page_mkwrite() without holding
mapping->invalidate_lock, so a concurrent truncate or fallocate can be
in the middle of invalidating pagecache and rewriting the runlist while
the write fault maps blocks and dirties the folio. This races with
ntfs_attr_fallocate(), which merges clusters into the in-memory
runlist, drops the runlist lock, and only afterwards zeroes the newly
allocated clusters on disk; and with the punch-hole/insert/collapse
paths that free clusters after truncating the cache.
Per Documentation/filesystems/locking.rst, ->page_mkwrite() must ensure
there are no truncate/invalidate races, "usually mapping->invalidate_lock
is suitable for proper serialization". xfs takes its mmaplock (= the
invalidate_lock rwsem) shared in exactly this path.
Take invalidate_lock shared around iomap_page_mkwrite(). The read-only
fault path is already covered because filemap_fault() itself grabs
invalidate_lock shared on instantiation/read paths; only page_mkwrite
was bypassing it in this driver. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix race between fallocate and mmap reads
The fallocate implementation only takes invalidate_lock for punch hole,
collapse range, and insert range operations. For standard allocation modes
(mode == 0, FALLOC_FL_KEEP_SIZE), the lock is not held.
During ntfs_attr_fallocate(), new clusters are mapped to the runlist via
ntfs_attr_map_cluster() before being zeroed by ntfs_dio_zero_range(). This
creates a window where concurrent mmap page faults can read uninitialized
disk data.
Since mmap uses filemap_fault() which takes invalidate_lock in shared mode,
it can fault in pages during this window and expose old disk contents to
userspace. This is an information leak and data integrity issue.
Fix by taking invalidate_lock for all fallocate operations, not just for
punch/collapse/insert modes. This prevents concurrent page faults from
accessing unzeroed clusters during the allocation window. |
| In Jenkins 2.587 and earlier, LTS 2.580.1 and earlier, the HTTP endpoint for creating the first user account does not check whether the setup wizard has been completed, resulting in a race condition that allows unauthenticated attackers to create an administrator account while the initial user account is being replaced. |
| A vulnerability was found in NocoDB up to 2026.08.0. This affects an unknown part of the file packages/nocodb/src/services/users/users.service.ts of the component Password-Reset Flow. The manipulation results in race condition. The attack can be executed remotely. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way. |
| A divide-by-zero error exists in the SeekIndex function of demux/asf/asf.c in VideoLAN VLC media player 3.0.7.1. As a result, an FPE can be triggered via a crafted WMV file. |
| A divide-by-zero error exists in the Control function of demux/caf.c in VideoLAN VLC media player 3.0.7.1. As a result, an FPE can be triggered via a crafted CAF file. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: own the request before clearing ->head
io_waitid_remove_wq() only takes the wait queue lock if ->head is set.
io_waitid_wait() clears ->head first thing, before it tries to become the
owner of the request by bumping ->refs. If somebody else owns the request
at that point, nothing keeps it from completing the request while the
wake up handler is still going to touch it:
CPU0 (io_waitid_wait) CPU1 (io_waitid, holds a ref)
list_del_init(&wait->entry)
smp_store_release(&iw->head, NULL)
__do_wait() finds another child
io_waitid_remove_wq()
// ->head == NULL, no locking
io_waitid_finish(), IOU_COMPLETE
// request freed and reused
atomic_fetch_inc(&iw->refs)
The same goes for __io_waitid_cancel() if it claims the request in that
window. ->refs is part of the per opcode data of the request, so this
increments whatever the next user of the request keeps there. If that
happens to be zero, the handler concludes that it owns the request, and
queues io_waitid_cb() for it. With the window held open by a delay, and
the request reused for a receive that is waiting for data:
BUG: KASAN: slab-use-after-free in __wake_up_common+0x1ca/0x1f0
__wake_up_sync_key+0x36/0x50
sock_def_readable+0xf1/0x420
unix_stream_sendmsg+0x60b/0x1110
Allocated by task 87:
io_arm_apoll+0x1ed/0x940
Freed by task 87:
__io_submit_flush_completions+0x118d/0x1a10
tctx_task_work_run+0x327/0x950
Only clear ->head once the handler owns the request. If it doesn't, the
owner finds ->head set and has to wait for the lock, which is held by the
caller of the handler. Deleting the already deleted entry again is
harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
fork: release the files of a failed fork after sched_cancel_fork()
Reorder copy_process() cleanup so sched_fork() taking scx_fork_rwsem
scx_pre_fork() is safe and isn't held around exiting files. Right now, a
fork that fails while another thread closed the bpf link fd will
deadlock against its own read side. It also blocks every fork on the
system:
copy_process() holds scx_fork_rwsem for read
exit_files()
close_files()
filp_close_sync()
bpf_scx_unreg()
kthread_flush_work() waits for the disable work
scx_root_disable()
percpu_down_write(&scx_fork_rwsem)
Simply release the child's files after sched_cancel_fork() dropped the
lock. The task starts out as a copy of its parent so p->files points to
the parent's table until copy_files() replaces it. exit_files() must not
run for a fork that failed before that. Clear p->files up front so
exit_files() is a no-op for those and make copy_files() set it
explicitly for CLONE_FILES. |
| A race condition was addressed with additional validation. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27, visionOS 27. An app may be able to cause unexpected system termination or write kernel memory. |
| Electrum before 4.7.2 contains a spending limit bypass vulnerability in the Nostr Wallet Connect plugin that allows malicious NWC clients to exceed daily_limit_sat by exploiting non-atomic budget checks and millisatoshi truncation. Attackers can send concurrent pay_invoice requests that pass budget_allows_spend() before add_to_budget() runs, or repeatedly pay msat amounts that are floored to whole satoshis, to drain funds beyond the limit. |
| A flaw in Node.js HTTP Agent connection reuse can cause a client to accept as valid a response that was sent before the client has sent the request. This is an incomplete fix of CVE-2026-48931.
The guard that destroys idle keep-alive sockets when unexpected data arrives only runs when the event loop polls for I/O. If an unsolicited response has already reached the socket but has not been read yet when the socket is handed to a new request, for example because the event loop was busy with synchronous work, the guard is removed without seeing it and the data is parsed as the response to the new request.
This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**. |
| A race condition was addressed with additional validation. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. An app may be able to access sensitive user data. |
| A race condition was addressed with additional validation. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27. A malicious app may be able to break out of its sandbox. |
| In the Linux kernel, the following vulnerability has been resolved:
autofs: ignore notification errors from a replaced pipe
autofs_notify_daemon() takes a reference to the current notification
pipe under wq_mutex, then drops the mutex before writing the request. The
write can block while the daemon enters catatonic mode and installs a
replacement pipe.
If the old pipe's reader is then closed, the delayed write returns -EPIPE
and the generic error path enters catatonic mode again. That transition
acts on the current superblock state, closes the replacement pipe, and
releases the new daemon generation's wait queues.
Only enter catatonic mode when the pipe which failed is still the current
pipe. Factor the already-locked transition so the identity check and state
change are atomic with respect to another replacement.
This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest.
An unprivileged UID 65534 lookup filled the old packet pipe before a
normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe
received HUP and both a pending victim lookup and a later lookup failed
with ENOENT in two out of two fresh-mount runs.
With this change, the new pipe remained active, received an intact
304-byte request, and both victim lookups completed in two out of two
runs. Normal lookup and restart-without-a-blocked-writer controls passed.
No KASAN, oops, refcount, or lock diagnostic was observed. A source
reproducer and complete local logs are available privately on request.
The demonstrated impact is limited to denial of a shared autofs service
during a legitimate daemon restart. No memory corruption, information leak,
privilege escalation, or code execution primitive was observed. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Installer allows an authorized attacker to elevate privileges locally. |
| A flaw was found in util-linux. Restricted bind mounts take the source path from fstab but do not pin that source before the privileged mount. A local unprivileged user who can replace the authorized source or a writable ancestor can redirect SUID mount(8) to bind another host directory. If the fstab entry also sets X-mount.owner, X-mount.group, or X-mount.mode, root then changes ownership or mode on that redirected inode. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: treat TCP_CLOSING as once-established
Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can
race with the connect loop. Immediately break and return 0 on
ESTABLISHED/CLOSING. The return value of connect() should reflect what
happened up to the point the connection was established or failed. Events
that occur afterwards must not affect it. E.g. even if OP_RW has already
set sk_err, connect() should still return 0, not ENOBUFS because of it.
Adapt the inaccurate comment above signal_pending().
Resetting a socket that is still present in connected_table can lead to
memory corruption. The reporter noted lost transports for in-flight skbs,
and I have reproduced crashes caused by re-insertion into connected_table.
list_add double add: new=, prev=, next=.
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:__list_add_valid_or_report+0x11f/0x130
Call Trace:
vsock_insert_connected.cold+0xe/0x13
virtio_transport_recv_pkt+0x10e9/0x1460
vsock_loopback_work+0x305/0x480
process_one_work+0xe4c/0x1560
worker_thread+0x4f1/0xd60
kthread+0x36e/0x470
ret_from_fork+0x47b/0x6b0
ret_from_fork_asm+0x1a/0x30
This fix is supplementary to commit 002541ef650b ("vsock: Ignore
signal/timeout on connect() if already established"). Details under Link. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-crypt: fix a tiny race condition in crypt_dec_pending
crypt_dec_pending reads io->error before calling atomic_dec_and_test.
Another context, for example crypt_endio called from an interrupt, may
set io->error and drop its reference between the read and the
decrement. crypt_dec_pending then drops the last reference and completes
the bio with the stale status - so a read that failed and was never
decrypted, or a write that failed, is reported as successful.
The read was placed before the decrement by commit b35f8caa0890 ("dm
crypt: wait for endio to complete before destruction"), because that
commit freed dm_crypt_io before calling bio_endio. This is no longer the
case, dm_crypt_io lives in the per-bio data now.
Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is
fully ordered, so no additional barrier is needed. |
| WordPress Core is vulnerable to Remote Code Execution in versions 4.7 through 7.1.3. This is due to predictable, web-accessible staging paths used during full-package core upgrades. This makes it possible for unauthenticated attackers to execute code on the server during the upgrade window. |
| A flaw has been found in HaschekSolutions PictShare up to 3.7.1. The impacted element is the function architect of the file src/inc/core.php of the component File Upload. This manipulation causes race condition. The attack can be initiated remotely. The attack's complexity is rated as high. The exploitability is regarded as difficult. The exploit has been published and may be used. Upgrading to version 3.7.2 is sufficient to resolve this issue. Patch name: 6306e33da630c04ddff60703922c2ec7b7539452. It is advisable to upgrade the affected component. The vendor was contacted early about this disclosure. |
